Whooops, I do it again...

Winu · Dec 20, 2014

That poor car (before i buy it) drives a few thousands km with solenoid damaged, so no work of VVC. We try to actuating it manually with some cleaning chemicals, and with using external vacuum pump but it still not working smooth and block...

roccotune · Dec 20, 2014

Winu said:
That poor car (before i buy it) drives a few thousands km with solenoid damaged, so no work of VVC. We try to actuating it manually with some cleaning chemicals, and with using external vacuum pump but it still not working smooth and block...

I guess there is a point of no return. Did mine again today and it's still working well. When I first did it it must not have worked at all as the car was very flat. Get a bigger turbo

Oldyam · Dec 21, 2014

roccotune said:
Some times this can be saved by actuating it by hand for a few days in a row. I do mine twice a year, or just when ever I am under the car in the right area and it's always good now. I normal hook a rig spanner over the rod and work it fully about 50 times.

Worth a shot if it's just coked up

This is a common fault with the VW VVT's as well only real cure is to remove / strip / clean, and then reassemble with only the very lightest lubrication when everything is freed off and working smoothly with no tight spots.

At least the hippo turbo is easier to get at than a RR full size or sport

the linkage on the LHS turbo seizes !!

Winu · Dec 22, 2014

Well, I'll replace it after new year, maybe problems will go away, only new intake will be needed :crazy:

Winu · Dec 30, 2014

Put new battery cos previous were to small and very old, but alternator is fried now. What a piece of sh##!!

this is first competition of our winter triathlon under Land Rover auspices - Smashing your alternator by hammer... The next competitions are : Time sprint with 25 kg battery and precise shooting to previous owner of this marvelous model.
Unfortunately, no podium places in smashing...

:brick:

So order a few bits :
-AC Shnitzer M47 Garret turbocharger
-New 150 Amp alternator
-2x front halfshafts
-A set of items to put new turbo in place properly (studs, bolts, oil pipes blah blah blah 200 quid for all)

Another 500 went oud... maybe it will drive now?
Oh.. it won't
Front brakes also f!!@#! another 550 :crazy:

Over and out.

Winu · Jan 2, 2015

Got a new toy :

Donor was wrecked, that turbocharger got only 30K Miles, and it's still under warranty

. Now we waiting for install kit and brand new alternator

ZDomZ · Jan 2, 2015

Me like!

Winu · Jan 3, 2015

Active Saturday with measuring tape and caliper

Some measurements to develop new air intake...
Yeah, i know engine looks ugly now

a list of bits:

For top air intake pipe between wheel arch and air filter:

-1 x Alloy 90' bend 70mm OD, 60cm "L" shaped type (20/40cm)
-1 x Silicone Jointer 68mm straight
-1 x Silicone Jointer 45' 68mm
-4 x T-Clamp 70-78mm

For lower pipe IC- Intake Manifold pressure feed:

-1x Alloy pipe 90' bend 51mm OD, 60cm "L"shaped type (20/40cm)
-1x Silicone Jointer 180' bend 51mm "U" Type
-1x Silicone Jointer 45' 51mm
-4x SGB clamp 56-59mm

For Intercooler feed from turbocharger

-2x Silicone jointer 90' 51mm
-1x Alloy jointer 51mm x 60 mm
-4x SGB clamp 56-59mm

Winu · Jan 8, 2015

brand new 150Amp LR/Valeo power generator for Td4.

Because refurb is too mainstream :5bdrool5:

baptista · Jan 8, 2015

more money than sense...
you are #1!!!

Winu · Jan 8, 2015

Yeah, i know :cool2:

Just receive an turbo installation kit from Land Rover

If somebody need it in future, here is content of kit:

1 x PJZ100170L, GROMMET
1 x LR005984, TURBO HOSE OIL DRAIN BMW / TD4 - FREELANDER 1 - P38 RANGE ROVER
1 x PNH101811, HOSE - TURBOCHARGER OUTLET
2 x ESR1695, NUT M10 FLANGED COPPER
1 x STC4533, HOSE - TURBOCHARGER INLET
2 x STC2350, BOLT M6 X 14MM
2 x LR029638, BOLT - HEX.HEAD
4 x LYX100640L, SEALING WASHER TURBO FEED 2.5L DIESEL - P38 RANGE ROVER
3 x PYP100650L, SCREW HEX HEAD MAN>TURBO 3L G-CAT
1 x 8510016, GASKET OIL DRAIN PIPE>TURBO BMW P38 RANGE ROVER
1 x 8510327, GASKET TURBO>MANIFOLD DIESEL 2.5L - P38 RANGE ROVER
2 x PYR000010, STUD M10 X 20MM + M10 X 20MM L322 RANGE ROVER

Just waiting for intake parts, new front drive shafts.

baptista · Jan 8, 2015

Winu said:
Yeah, i know

Just receive an turbo installation kit from Land Rover

1 x PJZ100170L, GROMMET
1 x LR005984, TURBO HOSE OIL DRAIN BMW / TD4 - FREELANDER 1 - P38 RANGE ROVER
1 x PNH101811, HOSE - TURBOCHARGER OUTLET
1 x STC1205, BULB & HOLDER CLEAR DASH - DISCOVERY 1 - RANGE ROVER CLASSIC
2 x ESR1695, NUT M10 FLANGED COPPER
1 x STC4533, HOSE - TURBOCHARGER INLET
2 x STC2350, BOLT M6 X 14MM
2 x LR029638, BOLT - HEX.HEAD
4 x LYX100640L, SEALING WASHER TURBO FEED 2.5L DIESEL - P38 RANGE ROVER
3 x PYP100650L, SCREW HEX HEAD MAN>TURBO 3L G-CAT
1 x 8510016, GASKET OIL DRAIN PIPE>TURBO BMW P38 RANGE ROVER
1 x 8510327, GASKET TURBO>MANIFOLD DIESEL 2.5L - P38 RANGE ROVER
2 x PYR000010, STUD M10 X 20MM + M10 X 20MM L322 RANGE ROVER

it's Xmas again :lol:

Winu · Jan 8, 2015

Nah, guy looks like courier instead of santa, and have yellow DHL van.

Winu · Jan 10, 2015

Saturday inspection of replacement turbocharger - before Monday fitting. No backslashes , VNT works with finger touch, case is clean and healthy.
Fitted with new accessories from my British friends should work fine

Winu · Jan 20, 2015

Direct from Santa Perpètua de Mogoda, 12 yrs old fog light kit. Still unopened and unused

Love that job

Winu · Jan 21, 2015

New toys for Td4

New air intake/boost piping

Dangermike · Jan 22, 2015

Now that is a lovely site!

Winu · Jan 23, 2015

Proudly to announce that we've got a new nice toys directly from Japan

Stay tuned :bounce:

LandyMan · Jan 23, 2015

I'm very jealous of you Winu! ... but it's cool to watch you build these freelanders

Morten 1 · Jan 23, 2015

Winu said:
Direct from Santa Perpètua de Mogoda, 12 yrs old fog light kit. Still unopened and unused

Love that job

I bought a similar set, brand new and in the box like yours, only with the V6 lamps and brackets. (bought the correct ones on the bay of many things.

)

Quick question. I followed the instructions to the letter when I installed it, however the fogs will only operate with the lights in position 0 (Because of the mandatory daylight driving lights here in Norway) and in with the lights on. Not when the light switch is positioned with only side lights on the fogs will not work... My kit was from the US, perhaps there is some difference between the countrys? If you could drop me a line either here or in a PM when you have installed your kit, I would be most grateful!

Love your car and the build threads by the way!Well done!

Whooops, I do it again...

Active Member

New Member

Active Member

Active Member

Active Member

Active Member

New Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Well-Known Member

Active Member

Similar threads