jedi
Well-Known Member
- Posts
- 2,327
- Location
- A Galaxy far far away.......
Whooops, I do it again...
- Thread starter Winu
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Beta v1.1 of air intake . 2.75" intake, 2" inch boost between IC out and Manifold inlet
Some adjustments need to be done:
-Intake pipe is not leveled
-Need some fixings to intake manifold and vibration isolators.
-Lower pipe need to be placed (turbocharger -> IC inlet)
-EGR removing (it's disabled but need to buy a flange with boost gauge connection)
-A lot of engine bay cleaning.
Results are nice . 2.1 Bar boost, very limited turbo lag
Some adjustments need to be done:
-Intake pipe is not leveled
-Need some fixings to intake manifold and vibration isolators.
-Lower pipe need to be placed (turbocharger -> IC inlet)
-EGR removing (it's disabled but need to buy a flange with boost gauge connection)
-A lot of engine bay cleaning.
Results are nice . 2.1 Bar boost, very limited turbo lag
Last edited:
Dangermike
Active Member
- Posts
- 482
- Location
- Benfleet Essex
Wow that looks awesome! What's the extra T Bolt on the lower right hand side for?
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
There is small joiner there cos pipe is to short for about 8cm.
Need to buy 180* silicone with longer "legs" or a little bit longer pipe.
Need to buy 180* silicone with longer "legs" or a little bit longer pipe.
Dangermike
Active Member
- Posts
- 482
- Location
- Benfleet Essex
Makes sense!!
Another odd question .... What's the badge next to the Td4 badge on the boot??
Another odd question .... What's the badge next to the Td4 badge on the boot??
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
This is "ROCK" badge, one of few LR's editions (accesories set ect.) There were few limited editions like Kalahari, Magellan, Black Spirit ect.
On the new boot - i don't know what is this. remove it and put proper badge
On the new boot - i don't know what is this. remove it and put proper badge
Last edited:
jedi
Well-Known Member
- Posts
- 2,327
- Location
- A Galaxy far far away.......
Next bigger turbo
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Job done . in casing of standard BMW td4 turbo, better parts are living
. in casing of standard BMW td4 turbo, better parts are living
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Brakes
Mirror Shine
Waiting for 18 Inches a little detail from those
Oh, and please buy and read next issue of LRM
Mirror Shine
Waiting for 18 Inches
a little detail from those
Oh, and please buy and read next issue of LRM
jedi
Well-Known Member
- Posts
- 2,327
- Location
- A Galaxy far far away.......
here he got a small fuel leak:
Was this leak caused by the copper washer that seal the injector to the head?
Or was the actual injector leaking somewhere?
Was it just the 1 injector that was at fault...I have the same problem and need to sort it sometime...[emoji2]
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Washers, fuel back line and small o-ring from camshaft sensor
Td4 now looks like engine not a crap from barn
Got all 3 pipes done - no more crap land rover pipes. Just waiting for new intake manifold flange.
Bulkhead insulation is refurbished and looks good now.
A/C lines polished to match intake, fuel lines simmilar.
Need to order new expansion tanks, caps and oil dipstick - it's impossible to clean those
Td4 now looks like engine not a crap from barn
Got all 3 pipes done - no more crap land rover pipes. Just waiting for new intake manifold flange.
Bulkhead insulation is refurbished and looks good now.
A/C lines polished to match intake, fuel lines simmilar.
Need to order new expansion tanks, caps and oil dipstick - it's impossible to clean those
Dangermike
Active Member
- Posts
- 482
- Location
- Benfleet Essex
Wow! Now that looks epic!! What's the badge on the engine cover?
Are you going to install egr blank?
Are you still using standard air filter?
Are you going to install egr blank?
Are you still using standard air filter?
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Egr is disabled now, my new flange between pipe and manifold is travelling across Europe. . EGR will be totally removed.
Filter will be replaced with high flow, need to wait for it because all filters that I can source locally are oiled - MAF don't like oil filters.
Badge on engine is AC Schnitzer - an German tuning company, they tune this unit few years ago.
. EGR will be totally removed. Filter will be replaced with high flow, need to wait for it because all filters that I can source locally are oiled - MAF don't like oil filters.
Badge on engine is AC Schnitzer - an German tuning company, they tune this unit few years ago.
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Get the last issue of LRM, there is few words about second project
Last edited:
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Bling level rising...
18 inches, in gloss chrome paint, with range rover center caps. Temporary tires . Shine as hell , can't do a proper photo with cell camera
18 inches, in gloss chrome paint, with range rover center caps. Temporary tires . Shine as hell , can't do a proper photo with cell camera
Last edited:
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
A little bit play with gauges to match VDO ones
Those are test gauges, that's why RPM and Fuel gauge is still white - just for show the difference
Those are test gauges, that's why RPM and Fuel gauge is still white - just for show the difference
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Got some nice stuff for front :
Also got some other stuff for other areas of Td4
Somewhere between UK and PL my sport suspension is traveling . Garage days commin...
:
Also got some other stuff for other areas of Td4
Somewhere between UK and PL my sport suspension is traveling
. Garage days commin...
Dangermike
Active Member
- Posts
- 482
- Location
- Benfleet Essex
That's a nice collection of parts!
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
Yep, we got here few bits. An a lot more on van
Should start disassembly it in middle of next week
Should start disassembly it in middle of next week
