Search results

there isnt that much behine the lower dash, a small amount of wiring running to the wiper motor and center pannel if you have one. then there the vent control wire and that should be it. you need to take out all the screws and then the two bolt which are hidden by the plastic tray in the dash...

ill agree with that! my webber was no end of bother, i had to clean it every week, and my landy never ran right with it on, it seemed very flat. zenith all the way imo.

probably wont be what you want but i know where theres a 2a lightweight chassis, with axles, springs shocks etc with v5 tax exempt, 400 quid if your intrested.

has it been said yet? thats a merc G wagon! but more to the point, its not the fact that we need these vehicles for duties such as mountain rescue, the life guards, and the fire service but people should have a right to enjoy a hobby (or hobbies) whatever it maybe. i personally think horses...

this is the one, i cant see where the wire goes though, blood air pipe!

ill get a pic tomorrow, there is only one solenoid, its on the oposite side of the carb to the throttle linkage and is angled back towards the bulkhead. its screws into the carb and looks like a needle on the end (the end in the carb).

it happens most after big bangs or after a prolonged periods of wide open throttle followed by shutting off, then it starts to surge. any idead about the wire on my carb? were do i put it?

procomps alegedly have bump stops in them, and the front doesnt flex enough to max the shock i have on. it be reet tho, procomp shocks are dirt cheap and as of yet i havnt managed to break one.

ive got a constant problem with my idle speed being eratic, every time i got off roading and shake my old series 3 about the idle slows down or speeds up and its really anoying as it will sometimes cut out. so far ive put a lock nut in the idle speed screw, replaced my: coil, points, condenser...

im running 1 ton shackles, pairobolox springs, no check straps and 750x16s. the main problems ive found is finding shocks long enough to accomodate the travel (strandard rears on the front, and procomp +2" at the rear), the front prop hitting the crossmember (i made a 12mm prop spacer) and a...

which insa turbo tyres are they?

get the defender style ones with new hinges for 30 quid for the pair! i advise tightening the screws underneath the mirror head, both of mine were way loose and the mirror would move whilst driving.

i totally agree, brit part are ****e! as my local 4x4 place says 'brit part, anything but brit'. i had some brit part vent and door seals for my series 3, neither were anything like! i had to mod all the seal lips to accept the new defender type seals (yes i ordered the right ones) and i had to...

i had a switch go like that. it would work but only inbetween the clicks (sorry for the bad explanation). i just swapped it and it was fine. the head light, could be a bulb, bad earth or a broken wire. id whip the buld out and ahve a look at it if its blown change it, if it looks fine, get...

I was there in my pastle green series 3 truck cab. it was a really chilled out weekend and my first time off roading which i really enjoyed. the auto jumble was a bit thin imo, but i did get a bargain, two truck cab window catches comeplete with rail for 8 quid. and ive lined up a 2.5 diesel...

LOL! no this particular firend is never happy bunny! first they banned guns, so that was the love of his life gone, then, my mates and i got screwed when they brought in a law to stop the sale of air soft guns and equipment on the uk. so that was two big hobbies of his gone so any time he can...

i was also told you cant drive a van in and around london is its older than a 51 plate or something! its just plain daft.

Hello all, im pretty sure i can laugh a fair bit. i think you have to see the funny side of life owning a landy, they can be a rewarding yet infuriating vehicle. i took it to langley farm yesterday (going again today) i know the course there isnt 'extreme' but for a first time experience it...

im in huddersfield. where you from matey? coming to langley farm tomorrow and sunday? ill be there in my series 3, looks all nice bar from my scabby white 8 spokes! lol.

Hello all, im new to landrovers and the forum. Im Tim, im 21 and a mechanical engineer from yorkshire. i just finnished my series 3 project which started when i was 17, its taken me along time due to many factors but ive got there in the end. She (ive named my landy Bertha after a local...