- Posts
- 83,255
- Location
- Embasinga stocæ
Disco?
Disco, Hippoo, Deepender?
when yu gonna get a Rangie,Mondeo?
Disco, Hippoo, Deepender?
when yu gonna get a Rangie,Mondeo?
Britpart-****part
- Thread starter yella
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
i totally agree, brit part are ****e! as my local 4x4 place says 'brit part, anything but brit'. i had some brit part vent and door seals for my series 3, neither were anything like! i had to mod all the seal lips to accept the new defender type seals (yes i ordered the right ones) and i had to give up on the vent seals as theyre about 10mm too short, i know theyll stretch but have you tried holding them in and trying to close the vent?
genuine may cost a bomb but at least it works!
genuine may cost a bomb but at least it works!
yella
New Member
- Posts
- 15,991
i reckon mondo is right there grunt,a new rad cost me 85 quid
mondo
Banned
- Posts
- 7,631
- Location
- Yorkshire / Buckinghamshire
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
It dunt leak or owt, it's just that most of the fins have buggered off on the back so thought I change it whilst it's all apart.
yella
New Member
- Posts
- 15,991
get some old tin an mek new fins
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
yella
New Member
- Posts
- 15,991
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
An get HB to no nails em on
Ere wot happened to Serk Services? or was it Serc Services they did exchange radiators but can't find anything of em on tinterweb.
Ere wot happened to Serk Services? or was it Serc Services they did exchange radiators but can't find anything of em on tinterweb.
mondo
Banned
- Posts
- 7,631
- Location
- Yorkshire / Buckinghamshire
If yer stuck thurs a spot near me that did mine !
gis a shout if yer want! I'll price it up fer yer!
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
just looked in yeller pages an there's only two radiator speshalists there used to be loads.
thats what yer get fur buyin from crapocks and paddfuks.
, they do a really good job though , peddling in cheap crappy rubbish as opposed to being the land rover specalists that they say they are.
still , if we keep buying from them , it can only get worse , then soon they will have knocked out all the compertition with their cheapness n we wont have any choice but to buy crappy rubbish.
, they do a really good job though , peddling in cheap crappy rubbish as opposed to being the land rover specalists that they say they are.
still , if we keep buying from them , it can only get worse , then soon they will have knocked out all the compertition with their cheapness n we wont have any choice but to buy crappy rubbish.
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
britpart has gone down hill recently, a couple of months ago i fitted a lecky windah regulator to a disco, it were welded in the wrong place and the welds were so poor that the first time i opperated it the fookers snapped i had re align and re weld the fooker
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
So do I get a new radiator from Paddocks for a nundred an eight quid or get mine recored for a nundred an twenny quid? Fink I'll go fer the recore.
yella
New Member
- Posts
- 15,991
yo got the number fer that recore firm grunt, i just put the end of me ratchet fru me new rad
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
I dunt think I like the new techniques you are using for installing radiators. I fink I may have to use someone else
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
Wunt trust the pair o' them Sirus. Tcha, bunch o' fookin amarchers!
yella
New Member
- Posts
- 15,991
fank fook fer radweld eh, its done the job yet agin
