Windlass style Winch

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
JohnM70

JohnM70

Well-Known Member
LZIR Despatch Agent
Posts
51,047
Many years ago, when I was very first involved with HMCG, we had an old Series 3 (probably) that had a windlass hydraulic winch on the front for cliff rescue jobs - you'd nail the 90 down with 6 x 3-ft spikes and rope, then the man would go over the edge with his mainline connected to the windlass and his safety via 2 blokes.

Now the point of this thread is to find out if such winches are still available? I have this thought that they would be better than the standard which, which is limited to the X number of meters you get on the drum. With a windlass, you're not. The local Lifeboat station use to use a petrol driven one bolted to the boathouse floor to recover the inshore boat & trailer, so they are capable of doing some load I guess...

Discuss...
 
Remember lifting lobster creels on my mates boat in Dunbar with a hydrolic winch there was a fair weight in the lines of pots.
The winch on my 101 is pto capstan not that ive tried it yet
 
Recovery with a capstan/ windlass takes great care otherwise you’ll get slippage. Need a double loop to maintain grip. Stopping and starting also tricky. I’d love to fit a PTO capstan to my S3. They come up on fleabay in various states. Good ones cost at least £500. You can google to download instructions for fitting n maintainace.
 
John S said:
Recovery with a capstan/ windlass takes great care otherwise you’ll get slippage. Need a double loop to maintain grip. Stopping and starting also tricky. I’d love to fit a PTO capstan to my S3. They come up on fleabay in various states. Good ones cost at least £500. You can google to download instructions for fitting n maintainace.
Click to expand...

Yes i beleive it is tricky its a knokken ive got operated by hand throttle in cab runs out either front or rear from mid chassis mount not tried it yet lots still to do...but reading handbook without pressure on cable wont pull and if you cut engine will if youve got weight on it will spool back out...will find out soon...lol
 
John S said:
Recovery with a capstan/ windlass takes great care otherwise you’ll get slippage. Need a double loop to maintain grip. Stopping and starting also tricky. I’d love to fit a PTO capstan to my S3. They come up on fleabay in various states. Good ones cost at least £500. You can google to download instructions for fitting n maintainace.
Click to expand...

Yes i beleive it is tricky its a knokken ive got operated by hand throttle in cab runs out either front or rear from mid chassis mount not tried it yet lots still to do...but reading handbook without pressure on cable wont pull and if you cut engine will if youve got weight on it will spool back out...will find out soon...lol
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
KISSMYAURA
DOUBLE WOODEN CAR PORT & MUSIC STUDIO BUILD
6 7 8
Replies
142
Views
22K
KISSMYAURA
KISSMYAURA
landy-lee
Winch rope.
Replies
2
Views
620
leeds
L
WoodyO
Series Recon Gearbox - Avoid JKB 4x4 Gearboxes
2
Replies
37
Views
6K
pikefly
pikefly
Beneagles
Introducing Sergeant Cash
3 4 5
Replies
81
Views
9K
Def90man
Def90man
Back
Top