Anaconda
Well-Known Member
- Posts
- 3,554
- Location
- Thames Valley
It does, camera trick maybe?
What have you done on your 90/110/130 today?
- Thread starter neilly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
JimS
Well-Known Member
- Posts
- 10,715
- Location
- Not far enough away from London
Did the tensioner and idlers on the TD5
Doesn't sound like a supercharged locomotive now
Doesn't sound like a supercharged locomotive now
Anaconda
Well-Known Member
- Posts
- 3,554
- Location
- Thames Valley
It does still look slightly oval, must be Britpart specialsNope, still looks wrong, more photos needed
J
He'll have to get some Britpart oval bolts to go with it!
Replaced the ECU coolant temperature sender (3.5 V8i 14cux in a 90).
Noticed when testing the Efi circuits the other day that the resistance was 1100 Ohm indicating 40C when both cold and hot!
The original sender had a plastic nut which started to slip with the open spanner but got a ring spanner on after removing the dizzy cap; the new CTS is all brass.
Simple job, didn't drain the cooling system and lost about a cupful. Read 3200 Ohm ~15C cold and decreased as she warmed up to ~200 Ohm once the thermostat opened ~88C. I'm happy with that!
Noticed when testing the Efi circuits the other day that the resistance was 1100 Ohm indicating 40C when both cold and hot!
The original sender had a plastic nut which started to slip with the open spanner but got a ring spanner on after removing the dizzy cap; the new CTS is all brass.
Simple job, didn't drain the cooling system and lost about a cupful. Read 3200 Ohm ~15C cold and decreased as she warmed up to ~200 Ohm once the thermostat opened ~88C. I'm happy with that!
Last edited:
I think either you guys need new gregs, or I need a new phone with a straight camera.It does still look slightly oval, must be Britpart specials
He'll have to get some Britpart oval bolts to go with it!
They look fine to me you need new camera
.I guess that's the LR tolerance, it only needs to hold "apart" (or is it together?) so a bit of uppy downy don't really matter
J
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
So it fits….
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
allows for the twist in the chassis.Smart arse. If that was the reason they would go the other way
Oh good shout. Is that knowledge or a guess ?
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
Anaconda
Well-Known Member
- Posts
- 3,554
- Location
- Thames Valley
Standard knob or all singing and dancing one?
- Posts
- 4,549
You mean a proper knob or a 'bit of a knob' knob ?
standard one. I was tempted by a period series-style knob though…
Anaconda
Well-Known Member
- Posts
- 3,554
- Location
- Thames Valley
I have them, they are rather nice.standard one. I was tempted by a period series-style knob though…
Similar threads
