Imortalrelic
Member
- Posts
- 47
- Location
- Auckland NewZealand
Oil change and a less banged up slightly straighter sump on. Looked at the engine mounts yeah nah maybee later!
What have you done to your tratter today?
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
dominicbeesley
Well-Known Member
- Posts
- 1,701
- Location
- Hebden Bridge, West Yorkshire
New number plate, MOT passed - no advisory, bargain!
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
today I have been mostly fiddling with my brakes
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
today I finished fiddling with my brakes, I also found out that if one cuts ones new ht leads too long they rest on the exhaust manifold and the plastic melts as you drive along 
doughnut
Member
- Posts
- 96
- Location
- Basildon, Essex
Summers here, I took the cab off.
Land Raver
Well-Known Member
- Posts
- 2,015
- Location
- In the dog house
samc88
Drivels spiritual representative
- Posts
- 2,838
- Location
- Anglesey, North Wales
Plan for the day is fit the temp sender to mine and clean up my new toolbox to go in the back
dominicbeesley
Well-Known Member
- Posts
- 1,701
- Location
- Hebden Bridge, West Yorkshire
Yesterday, undercoating chassis of one, fitting new speakers to the other - a bit tinny but I can at least hear them!
jcuk
Active Member
- Posts
- 257
- Location
- Wigginton, Hertfordshire
I fitted my new Clayton heater matrix core. It seems to be a but thinner than the original, so it took ages messing about with spacers and washers to get it all to go back together and still have the fan turn.
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
took the s1 for a good early morning road test, now its fully operational again.
samc88
Drivels spiritual representative
- Posts
- 2,838
- Location
- Anglesey, North Wales
Fitted the temp sender yesterday and the result is my gauge reads as it should
derinj
New Member
- Posts
- 33
- Location
- Maidstone, Kent
Passed the MOT with NO advisories!!!!! Hubby will sleep well tonight!
samc88
Drivels spiritual representative
- Posts
- 2,838
- Location
- Anglesey, North Wales
My dads 110 did that as well
To keep this series related while he was at the garage i got him to ask about aquiring a new gearbox for me May be on to a lead
joe27979
Well-Known Member
- Posts
- 1,354
- Location
- west Norfolk
overhauled front prop....polybush kit on order next to get my shackles swinging again
dominicbeesley
Well-Known Member
- Posts
- 1,701
- Location
- Hebden Bridge, West Yorkshire
yesterday I stripped down the carb twice! Somehow some wood shavings have got in somewhere and keep blocking the bloody jets, first time was the 1st idle jet causing it to stall at lights that was easy to clear. Then I took the top off the carb and replaced filters, cleaned out the bowl and blasted everything with Carb cleaner. Now it runs better at speed and idle but has a steering wheel head butting hesitation when setting off which might be a bit more difficult to track down and fix....
Oh and I'm off to catch the ferry to France in a few hours...should be an interesting trip.
Oh and I'm off to catch the ferry to France in a few hours...should be an interesting trip.
