What have you done on your 90/110/130 today?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Fitted a new bumper to the Ninety.
Took the heater box out of my TD5, rather surprised to see the bulkhead behind it in good condition.
20240602_113132.jpg
 
Yes i know.. the whiskey thing should've been higher up.. but it was rusted away..

new arches this weekend
new whiskey fuel only
new rear 90 badge
 

Attachments

  • 1718053639810.png
    1718053639810.png
    3.4 MB · Views: 196
  • C464EDA5-716A-4DC4-8EBA-CCF2A06D0B49.jpg
    C464EDA5-716A-4DC4-8EBA-CCF2A06D0B49.jpg
    551.3 KB · Views: 104
  • 05EDA615-29A9-4BC1-B8A2-F13CB3037913.jpg
    05EDA615-29A9-4BC1-B8A2-F13CB3037913.jpg
    518.5 KB · Views: 93
I’ve been after some wolf wheel studs on eBay for some time. I found some for a good price but they sold out. The seller emailed me last night to say they were back in stock so I ordered a set this morning. When I checked earlier this evening, they’d sold out again. £39.99 for a full set delivered!😁😁
 
Fitted the headlining in the Ninety.
Fitted new coolant temp gauge in the Ninety.
Fitted new bushes on one rear trailing arm on the 90.
Took it for a drive after fitting the new heater matrix the other day, all seems fine.
Watched the Red Arrows fly over the house.
Quite a bit considering the weather.
 
I had the front trailing arm off to re bush it and noticed the tubular cross member was giving it the old pastry rust where it went onto the chassis. So rightly or wrongly that came off and lo and behold….rust holes. So in short order they were cut out, plated and dressed back and ready for prime and paint. What’s next I wonder 🤔 Oh and a wee photo of my trailing arm as I’m quite chuffed wae it.
IMG_3305.jpeg
IMG_3306.jpeg
IMG_3308.jpeg
IMG_3307.jpeg
 
Last edited:
Back
Top