Winner!! Care to share any more detail. Looks spot on!!!Finished the joying head unit installation on my D1 and managed to get the dash buttons working with it
View attachment 309239
Other what have u done on ur disco today
- Thread starter gstuart
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 44,908
- Location
- East Dorset
Et dans quel coin de la France habitez-vous, mon vieux?Joined landyzone,
Remembered not to translate my question into French.
That's the trouble with being an ex-pat or immigrant .
Queried my insurance and replaced 4x 255/55 18 all season tyres now need a nap ,
On a V8, not a big deal as it's on top of everything.
On a TD5... well, it's a whole other thing...
Deepest, darkest Dordogne / Haute Vienne borderEt dans quel coin de la France habitez-vous, mon vieux?
- Posts
- 2,061
- Location
- Hertfordshire
No not a difficult job if you're handy with (the few) spanners needed. You'll need to remove the viscous coupling fan which is the only 'special' spanner you need. I believe Halfords sell them + online obviously.
Attachments
- Posts
- 68,245
- Location
- The Wooly Witch
D4 starter motor had given up. Stripped and cleaned (not by me) and now good as new
Couldn't they do the alternator while they were there ?
Not done it on a D2 but with decent access it should not be that difficult.
Disconnect battery first, have decent selection of metric spanners and take your time.
You may have to loosen the tensioner first to get belt off but again this is fairly straight forward.
Have a browse of the site, it probably on here somewhere.
- Posts
- 1,512
- Location
- Somerset (but I'm a Landanna)
They could if it was the same car.Couldn't they do the alternator while they were there ?
D4 = starter problem, D2 = alternator problem.
- Posts
- 68,245
- Location
- The Wooly Witch
Oops
- Posts
- 44,908
- Location
- East Dorset
Tarn /Herault/Aude corner, in the Montagne Noire, us. Best kept secret in France!
- Posts
- 380
- Location
- Cheshire
Lives another day, the V6 lion engine decided to try and eat the auxiliary belt tensioner on the D3 caught this just in time.
Opportunity to get the massive spanners out again to remove the fan.
New belt and tensioner fitted.
127,803 miles.
Opportunity to get the massive spanners out again to remove the fan.
New belt and tensioner fitted.
127,803 miles.
Attachments
Last edited:
- Posts
- 1,088
- Location
- Worcestershire
I went out this morning to replace the last couple of flexible brake pipes on the 101 but ended up removing the battery to place it on charge as it went flat after about five seconds of cranking.
Bloo disco 2
Active Member
- Posts
- 59
- Location
- Hull
Replaced the gear stick centering plate and springs, i can now select 3rd and 4th with ease.
Also replaced the rubber bung that caps off the pipe that's under the turbo with a nice new silicone one so no mere weeping coolant.
Andy
Also replaced the rubber bung that caps off the pipe that's under the turbo with a nice new silicone one so no mere weeping coolant.
Andy
- Posts
- 2,061
- Location
- Hertfordshire
Maat
Active Member
- Posts
- 169
- Location
- International
Spent four hours replacing an u joint on the front prop and greased all the others. Grease pumps are so much fun
- Posts
- 5,236
- Location
- South Bucks
Drove to Burford and got a couple of comments.
Maat
Active Member
- Posts
- 169
- Location
- International
Maat
Active Member
- Posts
- 169
- Location
- International
Along the lines of?
I was driving my 300tdi in town last year and some teenager dropped his cigarette and said its a fecking cool car. I think it just looks like a wreck though
- Posts
- 5,236
- Location
- South Bucks
Well, one bloke said, 'I haven't seen one that clean in many years' and another said, 'I had Disco one back in the 90's awesome vehicles' he asked if he could sit in it.Along the lines of?
I was driving my 300tdi in town last year and some teenager dropped his cigarette and said its a fecking cool car. I think it just looks like a wreck though
