- Posts
- 6,604
- Location
- uk
Pics or it never happened... he tried.
Pics or it never happened... he tried.
Need a fishing rod in the other hand
I don't think I have had porridge in 45 years!Morning ,
Walk had, getting some tyres on the Kuga in a bit. However chilling out and it's that morning for a pot of porridge.
He died about 8 years ago. Lr owned it for the last 5.Must be because Mr bowler died recently.
Be that a turmarter bottom leff? Iv so us boys bin duin it wrong orl these years.Morning ,
Walk had, getting some tyres on the Kuga in a bit. However chilling out and it's that morning for a pot of porridge.
Think its WL's tongue tasting the porridgeBe that a turmarter bottom leff? Iv so us boys bin duin it wrong orl these years.
Have a successful dayMorning all, off to a craft fair again today. We are booked in every weekend until Christmas now.
Morning ,
Walk had, getting some tyres on the Kuga in a bit. However chilling out and it's that morning for a pot of porridge.
I'm getting cross climates 2 on the Kuga like I run on fl2I’ve got the F2 booked today for 4 new tyres, and a full alignment also.
‘‘Tis the day for spending money it seems!
It's a red silicone spoonBe that a turmarter bottom leff? Iv so us boys bin duin it wrong orl these years.
Nice.I'm getting cross climates 2 on the Kuga like I run on fl2
Eye hassa 5.5mm diameter hole in somefink which needs the hole opening up so its centre is moved 3mm along. Last time eye tried to drill anuvva hole inner hole eye nearly lost me finger. Tis 1.6mm steel. Gittid 10 holes to do. New holes is 5.5mm diameter anorl. Wot would be yer preferred method?
Piller drill and 5.5mm bit un clamp metal tight. Take it slow and hope a sharp bit bites frew?
Use a side cutting bit?
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!