I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Stanleysteamer said:
So here's a thing.
Mad old me is wondering how difficult it would be to make a hole in the base of a new toilet cistern to accept the bottom fill paraphenalia.
I could practise on the old one.
What would you use?
I was thinking of starting with a tile drill
@brianp38dse have you ever needed to do anything like this?
@Ian M in France I know you do work for ex-pats over here, or I think you do, can you tell me if the mounting and flush holes in the base of a French cistern are a near enough match to fit onto a Brit made pan such as the ones we have from B&Q?
The plumbing needed to plumb one in would have to be very unsightly as we aren't about to spend €500 odd on a new bog. Grr :mad: :mad: :mad:
TIA all!
Click to expand...

Would it not be easier/cheaper to just buy a whole bog and cistern of whats available? and a dam sight less hassle;)

You are only going to spend 6 days getting it right after breaking 1 probably;).

Even if they are not 2 a penny there, use a side exit and run a flexi braided pipe up?

J
 
marjon said:
Would it not be easier/cheaper to just buy a whole bog and cistern of whats available? and a dam sight less hassle;)

You are only going to spend 6 days getting it right after breaking 1 probably;).

Even if they are not 2 a penny there, use a side exit and run a flexi braided pipe up?

J
Click to expand...
When in Rome comes to mind.maybe more expensive to start but maintaining would be cheaper and less aggro
 
Stanleysteamer said:
So here's a thing.
Mad old me is wondering how difficult it would be to make a hole in the base of a new toilet cistern to accept the bottom fill paraphenalia.
I could practise on the old one.
What would you use?
I was thinking of starting with a tile drill
@brianp38dse have you ever needed to do anything like this?
@Ian M in France I know you do work for ex-pats over here, or I think you do, can you tell me if the mounting and flush holes in the base of a French cistern are a near enough match to fit onto a Brit made pan such as the ones we have from B&Q?
The plumbing needed to plumb one in would have to be very unsightly as we aren't about to spend €500 odd on a new bog. Grr :mad: :mad: :mad:
TIA all!
Click to expand...
Hi Stand as far as I know the flush holes are the same size I can check size as have about 5 toilets to go in where I am working, problem is the holes that are used to fix cistern to the base/toilet are different between manufactures and different models, I have had to fit many new cisterns in holiday homes where water has been left over the winter and they have frozen normally I take the cistern off and take it into suppliers and see if I can find one that fits (I have to buy the complete toilet) but only have to fit cistern which saves changing the toilet
 
Whilst waiting for my dinner to cook I have competition tuned the cheese grater. Ports reamed out 40 thou oversize and I've reprofiled them to create a steeper capture angle. It's a vicious piece of kit now. I'd better warn Xylia in case she tried to use it and skins her knuckles.
 
Brown said:
Yes, as they're quite a hard bake, diamond would be my first choice too.

You might need to enlarge the hole to fit a standard cistern onto the close-coupled base, in which case as there's nothing to guide the pilot bit, clamping it (gently) and using a pillar drill with the diamond core drill in it might work.
Click to expand...
It's the hole to take the water inlet, so 1" roughly in diameter.
 
Ian M in France said:
Hi Stand as far as I know the flush holes are the same size I can check size as have about 5 toilets to go in where I am working, problem is the holes that are used to fix cistern to the base/toilet are different between manufactures and different models, I have had to fit many new cisterns in holiday homes where water has been left over the winter and they have frozen normally I take the cistern off and take it into suppliers and see if I can find one that fits (I have to buy the complete toilet) but only have to fit cistern which saves changing the toilet
Click to expand...
This is exactly my problem, I have made a drawing of the holes on the bottom to take with me when I go around places to look for a new one. Do you have any particular places you recommend I visit first?

Thanks for this info.
I kinda suspected it wouldn't be that straighforward.
I always leave sufficient heating on in the place to obviate the frozen water situation and it has worked so far.
I also always turn the water off. But from now on, just in case I'll flush all loos too before we go!
Cheers
Stan
 
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
896
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
1K
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
1K
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
712
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
1K
TITCH SANDERS
TITCH SANDERS
Back
Top