- Posts
- 9,098
- Location
- North Lincs
Ah, Bill needs the cash
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 16,358
- Location
- Benfleet, Essex
Yes, Melinda has emptied his trouser-pockets a bit and he needs a top-up.Ah, Bill needs the cash
- Posts
- 68,233
- Location
- The Wooly Witch
Darn it, shopping trolley failed it's MOT, split in the tyre rear N/S inner wall ...
Back to being a buswanker for a day or two ...
Back to being a buswanker for a day or two ...
- Posts
- 44,833
- Location
- East Dorset
I do love the way the weather in Bulgary is "defiant"Afternoon folks
Well temps have defiantly gone down last couple of days and it has been very mizzy oribble today.
Got the wood sorted to start the "west wing" ceilings, must get this started so we can have a recount of ****ters/showers
Good to see @Shimsteriom back
J
- Posts
- 44,833
- Location
- East Dorset
Oh dear, sympathies.Darn it, shopping trolley failed it's MOT, split in the tyre rear N/S inner wall ...
Back to being a buswanker for a day or two ...
- Posts
- 44,833
- Location
- East Dorset
No good news here, much, except I have finished writing Xmas cards.
Whoopee!!!
The drive-band for the head-unit now has to come from Japan, so we won't have it afore Crispmus.
And bro has a lump on his liver to be cut out and it may be in his lungs so his Chrispmus will not be all that merry and bright, the poor fecker. Can't believe that all this has happened to him in such a relatively short period of time. Only heard the start of it September 2020.
Must get on wiv a bit o dinner have a nice evening folks!
Whoopee!!!
The drive-band for the head-unit now has to come from Japan, so we won't have it afore Crispmus.
And bro has a lump on his liver to be cut out and it may be in his lungs so his Chrispmus will not be all that merry and bright, the poor fecker. Can't believe that all this has happened to him in such a relatively short period of time. Only heard the start of it September 2020.
Must get on wiv a bit o dinner have a nice evening folks!
Tenebreaux
Well-Known Member
- Posts
- 4,303
- Location
- Armagh
I was going to buy some 6mm T+E to install the new oven. Having seen the price I'll be recycling the stuff off the old one.
- Posts
- 9,098
- Location
- North Lincs
I had to buy 10m of 10mm for the workshop and that cost £50 and I thought that was pretty good
Tenebreaux
Well-Known Member
- Posts
- 4,303
- Location
- Armagh
44 quid at Screwfix, I still have the page open.I had to buy 10m of 10mm for the workshop and that cost £50 and I thought that was pretty good
https://www.screwfix.com/c/electric...8960001&cablelength=10_m&conductorarea=10_mm_
- Posts
- 9,098
- Location
- North Lincs
Drat I got mine from Toolstation
- Posts
- 68,233
- Location
- The Wooly Witch
Drat I got mine from Toolstation
Always compare as they tend to be close in location too ...
- Posts
- 9,098
- Location
- North Lincs
They are just up the road from each other. Next time
Tenebreaux
Well-Known Member
- Posts
- 4,303
- Location
- Armagh
No Toolstations in NI. They just opened a new Screwfix just up the road though.
- Posts
- 68,233
- Location
- The Wooly Witch
Build them and they will come ...
Hicap phill
Well-Known Member
- Posts
- 16,242
- Location
- Wiltshire
Good evening from Huntington. Busy day Done a big loop of jobs & back to same area as last night. Another lie in the morning, they don’t start till 8.
- Posts
- 13,787
- Location
- The Principality
You are correct but with the overlocker things are very different. Without taking the whole thing apart, something which I would not do, I had no choice but to call in the expert.I'd second that as I too have had to do this for Wifey's old one. A little lube and clean is usually all it'll need.
Like lots of machines, using em keeps em going!!
Strangely, it was not the electric bits or the twin needles and the upper and lower loopers but the manual wheel which would not budge - hence there was no way of moving any of the parts. I suspect it is something to do with the needles and loopers threading position that is at fault but there is no way of investigating this if the manual wheel is seized.
I do love the way the weather in Bulgary is "defiant"
Always have trouble with that word even spell check can’t help
, but it could work if you knew how much I was swearing at it to not be.But yes big words were never my strong point
.J
You are correct but with the overlocker things are very different. Without taking the whole thing apart, something which I would not do, I had no choice but to call in the expert.
I would rather deal with taking a V8 apart
.Hope your guru can fix it
.J
- Posts
- 13,787
- Location
- The Principality
But does it really matter - NO. It just gives (some of) us an opportunity to take the .....Always have trouble with that word even spell check can’t help
But yes big words were never my strong point
J
But does it really matter - NO. It just gives (some of) us an opportunity to take the .....
No I was definitely telling the weather not too get cold
It obviously defied meJ
Similar threads
