I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
marjon said:
Afternoon folks :).

Not getting involved in the Wt V force discussion, all I know is I weigh the same as when I was 20yrs old but to force my self to get up now seems to need more effort, which of course is force:p. So its all in me head.

So I have been clearing out the East wing of all the wood butchering offcuts from the decking job, It was used on the fire yesterday and will be tonight too.
Put the digger away to bed in the stable for the winter, must remember to disconnect the battery this year and bring it in.

Counting down the days to "bubble & squeak":).

No snow here yet although forecast for the west of the country.

J
Click to expand...
Had 50mm of it today and thunder storm but nice and snug inside bit peed of as are Brussels are the size of peas this year lot of work for the W prepping them 😉😉
 
I believe in Santa Claus full disclosure, so here is a confession for you all. When welding the cassette carrier to the main tube there was a slight hiccup. The cassette carrier managed to slip off the lip of the counterbore and became slightly off "true". Next time I shall make the counterbore a little bit deeper to try and prevent this from happening. Anyway, when you spin it up at 650 RPM the "wobble" is hardly noticeable. It wobbles less than the cassette on my Hase Catweasel.
Remember: This is a prototype and no-one's perfect. Certainly not me.
😃

Enjoy the video, any sniggering will be reported to Matron.
 
DanClarke said:
I believe in Santa Claus full disclosure, so here is a confession for you all. When welding the cassette carrier to the main tube there was a slight hiccup. The cassette carrier managed to slip off the lip of the counterbore and became slightly off "true". Next time I shall make the counterbore a little bit deeper to try and prevent this from happening. Anyway, when you spin it up at 650 RPM the "wobble" is hardly noticeable. It wobbles less than the cassette on my Hase Catweasel.
Remember: This is a prototype and no-one's perfect. Certainly not me.
😃

Enjoy the video, any sniggering will be reported to Matron.
Click to expand...

Tratter wheels wobble like that.
 
Had to work late as we were pulling in an old fish farm barge (250 tonnes) all went reasonably well until the lads in the work
boat managed to get the mooring rope for the ship round its prop, aye very good at 4.30 :mad::mad: then 2 of them in the water
trying to get off faffed about for 2 hours then they decided to cut it with a blunt knife they'd be better using a spoon 🤣
I shouted to them to use the *^^%% burning torch to melt the rope then heard them all shouting at each other whos got a
^%$$ lighter. 🤣

Pulled it back in with the rib so now need to wait until Monday to get it out the water to get the rope off it as its high winds
all weekend.

Then we all had a beer before coming home :vb-party2:
 
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
1K
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
1K
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
2K
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
1K
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
2K
TITCH SANDERS
TITCH SANDERS
Back
Top