I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Wimblowdriver said:
Not a good start to the day. Dropped a copper washer into the engine bay while fitting the oil feed pipe to the turbo. And I can't find it. And I ain't got another one. 'Er indoors is gonna call into halfrauds this morning and get me one of their assortment boxes, containing 75 washers. Anybody got a use for 74 copper washers?
Click to expand...
oops, feel for you mate.😢 When this has happened in the past I invitably find it sitting on top of a chassis rail or lodged into summat. Recently the UJ on the steering column or summat.
I only ever find them with my fingers!
Best of luck, betcher find it just as W turns up with the box!;)
 
Stone56 said:
Be calling you Arne soon 💪💪💪
Click to expand...
1688208340380.png
 
Stanleysteamer said:
oops, feel for you mate.😢 When this has happened in the past I invitably find it sitting on top of a chassis rail or lodged into summat. Recently the UJ on the steering column or summat.
I only ever find them with my fingers!
Best of luck, betcher find it just as W turns up with the box!;)
Click to expand...
FOUND IT :D. It was on the driveway under the engine (don't know how I didn't spot it earlier). And the report back from'Er Indoors - halfrauds ain't got any. Back under the bonnet I go ------
 
Afternoon folk :) .

Yesterday I went round to Ms friend to wire in the lights. So fitted 3 roses and switches, 2 lights up, wire to the fuse box and test awaiting sparks and smoke. But nope none:banana:. Ok let’s try the lights 1 was good second tripped the breaker, I have done something wrong but it can wait till today.
So off I toddle today for round 2. Clear head and straight to it, I had mucking fixed the switch cable as if it was a loop cable:vb-groan2:. So sorted easy, put up the 3rd light and then there was light:banana:
3 more to go up but as 2 are in the loft I said sod that, got to fit 12 sockets next as well, then position the fuse box. All fun ;).

So anyway back home have fired up the furnace (BBQ) and opened the pool, had a swim while it was starting and have just chucked a bucket of charcoal on, got a joint of beef and a joint of pork to go on in about 30 mins:)

Oh did I say it’s ot 😰.
happy days:banana::banana: enjoy the non work day’s workers.

J
 
WhiskyLassie said:
Finished the blanket and learned a new stitch. Been nice and actually resting and not moving. Decided to try that dove tan stuff as my legs are pale blue. Hope they don't look like carrots at the end of the day.

😎
Click to expand...
Knitting or crocheting?
M does a lot of crochet, I have blankets, socks, hats, ski masks? (yeah I don’t know either:vb-confused2:)

J
 
Turbo is on, oil feed n drains sorted, very difficult job of fitting the heat shield plate under the turbo done, DPF/CAT clamped and bolted back in place. That's enough for today, top heat shield and alternator to re-fit tomorrow. And loads of cables to hook up. Still waiting for delivery of an idler pulley which was out of stock. Onwards and upwards :D.
 
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
715
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
932
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
897
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
368
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
718
TITCH SANDERS
TITCH SANDERS
Back
Top