I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Flag layer not coming today, he did three rounds in the boxing ring at weekend and won but says he's still sore (he's 53)
Might as well dig some more out ready for the flags, probably could finish it myself now only ten more to lay

Bit of work to do in camper, fix sink in place and set water pump up etc, been looking at swivel seat bases but need a single passenger set with seat belt fitted and they're very expensive
Sun's shining, . good day all
Have to assume you can't get em secondhand/from a breaker or whatever. :(
anyway, have fun!:):)
 
Seats can be 200 quid from breakers :eek:
Think they cashing in on Transit camper trend recently
Don't want leather, plenty of those cheapish
Might have to modify something
Would it be too mad to buy a cheapish leather one and recover it? Or simply put a cover over it?
Or get an ornery seat and mod the base thingy?
(Typical sort of thing I've had to do. Kit cat seats are never straight forward.)
I've even had to modify a driver's seat for an old style Mini.:rolleyes: To make it legal.
Making a frame from a bigger one is a relatively easy cut'n'shut. Matching it to the runner, or in your case the swivel thing, has to be decided on early on.
Depends on how handy you or your wifey is with a sewing machine, cos the leather could be used as templates to make a material cover and at least all the rest of the upholstery, cushioning and stuff should stay the same. And presumably you wouldn't be bothered about piping. Can you get material to match the driver's seat, or take it off the original seat?
All good fun and sounds interesting!
Best of luck with it!:):):)
 
My God!
17,000 thought to be dead in the Turkey/Syria earthquake.:(:(:(
(Don't watch the news much, my bad.:()
How absolutely awful, my heart goes out to the families of all those poor people. :(:(:(
And yet it is almost knocked of the news by all the stoopid gawpers going to the river bank where that woman disappeared recently, for heaven's sake people, get a job and let the plods do theirs!:rolleyes:
 
Last edited:
Making a frame from a bigger one is a relatively easy cut'n'shut. Matching it to the runner, or in your case the swivel thing, has to be decided on early on.
Best of luck with it!:):):)
Ideal seat would be a double (similar to the one I have) but along the lines of Blackpool tram seats where the back flips over so the seat faces either way without spinning it. Then I could put a water tank underneath it
 
Ideal seat would be a double (similar to the one I have) but along the lines of Blackpool tram seats where the back flips over so the seat faces either way without spinning it. Then I could put a water tank underneath it
I have thought of two ways of doing that.
The simplest would be to have flat metal bar running from near top of the sides of the seat down to a swivel.hinge on the floor, halfway between the front and the back of the squab, upholstered the same way on both front and back, then you could just push the top of the seat back to the front of the squab. It could be hinged near the top of the seat back and then have a locking mech at the bottom of the back, so you could get the angle of it right. and the bar ould be shorter and therefore less in the way.
Or you could upholster it on just one side but have it flip over so the uholstered side is always facing the passengers' backs. You may need some sort of a slide mech for that. And of course the whole thing would have to fit in with safety regs but that is usually just a simple sort of lock mech.
You may also need a bar running through the seat back connected at both ends to the flat metal bars. To give it rigidity.
The problem with this set up is that it may not be very comfortable for travelling a long way. Tram seats were never intended to be sat on for hours on end! Which is prolly the reason why swivel seats were invented!
 
when I check in on this 'ere forum and before I log in I get some strange adverts popping up. Like posh watches (£100k types), gym wear, and wimmins underwear. Wot lifestyle do they think I've got??? :eek:.
It's like when I had my bank account compromised - what did 'they' spend the first £1500 on ......... membership of a dating agency!!! They obviously didn't have any details of the original owner!:D:D:D
 
My dad an his bruv were brickies on the Meon Valley hotel back in the day. Bruv was ex merch an had a ship to ship rocket burnin a nole in his pocket (as it were). They launched up the fairway on the new golf course :D

oh yer so they m@de it into @ 19 hole course :cool::D

found out th@t theres 28g of TNT in them fings I found :cool:

@ll the l@ds were h@ving @ l@ugh @bout me chucking them @bout :D:D
 
Last edited:
Luv it, "Gas Axe" lol.:D:D:D
When my neighbour and i were stripping the donor Cortina for my last kit car, in his garage, he started cutting up the body with it.:rolleyes:
Forgot about the headlining!:eek:
Phwarrr. did it smoke and stink! Had to vacate the premises once we'd put the flames out, for a little while.:eek::eek:
Still, meant I could take it down the tip in bits on his not very big trailer, made from a Mini subframe and a box made of wooden planks.;)

lol :D

I w@s using @ g@s @xe yesterd@y to cut @ 7tonne winch out of @ 20ft cont@iner :D:D
 
Back
Top