I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I'd actually ,like to see the science behind this.
In engine braking, the engine stops providing propulsion instead it uses lack of propulsion/vacuum to slow down the crank, i.e. cylinders take in minimal air and compress it so guess what only the same as when they compress it to get it to the point where you want the mixture to go "pop". But in reverse.
The crank applies braking force instead of propulsion force to the gearbox which then provides braking force to the diff and thence to the wheels.
the only possible argument is that you get more engine braking by putting the car into a lower gear and this makes the above more evident.
So I think this is bull droppings and so do others.
https://www.uti.edu/blog/automotive...elerator pedal gets,the engine speed, or RPMs.
the other 9 points are valid though.
 
With Fords dual mass clutch there is no engine braking on the Kuga. My Mrs complains about it nearly every drive! The 90 however it is essential as the proper brakes don't do much!
I wouldn't like to go down the mountain road from our place without it, even though it's an auto. Your ears pop twice in 10 minutes, it is so steep!.;)
 
With Fords dual mass clutch there is no engine braking on the Kuga. My Mrs complains about it nearly every drive! The 90 however it is essential as the proper brakes don't do much!
DMFs seem to me to be the work of the devil and are anough to put me off getting a D2 TD5 manual, as if the electronix wasn;'t enuff, which it is!!!
Why does a TD5 2.5 litre diesel need a DMF when a 300 tdi 2.5 litre does not need one?
Answers on a postcard please!!!:rolleyes:
 
DMFs seem to me to be the work of the devil and are anough to put me off getting a D2 TD5 manual, as if the electronix wasn;'t enuff, which it is!!!
Why does a TD5 2.5 litre diesel need a DMF when a 300 tdi 2.5 litre does not need one?
Answers on a postcard please!!!:rolleyes:

I have no answer for that, might be be a matter of the times, but..
When I bought me tratter I spent an afternoon test driving a 300tdi an a flashier TD5, one after the other over and over. After one run run the TD5 flashed up a dodgy wheel sensor. That was it for me. KISS. :)
 
I'd actually ,like to see the science behind this.
In engine braking, the engine stops providing propulsion instead it uses lack of propulsion/vacuum to slow down the crank, i.e. cylinders take in minimal air and compress it so guess what only the same as when they compress it to get it to the point where you want the mixture to go "pop". But in reverse.
The crank applies braking force instead of propulsion force to the gearbox which then provides braking force to the diff and thence to the wheels.
the only possible argument is that you get more engine braking by putting the car into a lower gear and this makes the above more evident.
So I think this is bull droppings and so do others.
https://www.uti.edu/blog/automotive/what-is-engine-braking#:~:text=When the accelerator pedal gets,the engine speed, or RPMs.
the other 9 points are valid though.
I went on an ADI course run by ex traffic cops and engine braking was a key element of control of the car.
 
"My Old Landy, post: 5481615, member: 148092"]What a load of tosh! I was taught to use gears and engine to slow down. It has not damaged an engine or drive train in the last 40 years :rolleyes: and it saves on brake wear :D[/QUOTE]

With Fords dual mass clutch there is no engine braking on the Kuga. My Mrs complains about it nearly every drive! The 90 however it is essential as the proper brakes don't do much!

It's rubbish, probably written by someone who can't drive but reads quora or some other bollix website.
If engine braking damages your car then so does accelerating

Anyone who rides a motybike knows that engine braking is the way, prolly summink to do with two wheels I dunno, but that's what I do. Similar inna Tratter, match revs to speed both up an down. Carefully though, the engine is stronger than the brakes.
Bruv (another biker) got told oft by the driving instructor for wrecking his clutch.
Fink I read somewhere that engine braking was more economic?
 
="Turktowner, post: 5481696, member: 137979"]"My Old Landy, post: 5481615, member: 148092"]What a load of tosh! I was taught to use gears and engine to slow down. It has not damaged an engine or drive train in the last 40 years :rolleyes: and it saves on brake wear :D
Anyone who rides a motybike knows that engine braking is the way, prolly summink to do with two wheels I dunno, but that's what I do. Similar inna Tratter, match revs to speed both up an down. Carefully though, the engine is stronger than the brakes.
Bruv (another biker) got told oft by the driving instructor for wrecking his clutch.
Fink I read somewhere that engine braking was more economic?
As an ex biker too (37 years on two wheels) I agree.
 
Back
Top