- Posts
- 9,095
- Location
- North Lincs
I had no choiceNow go & wash your mouth out
I had no choiceNow go & wash your mouth out
I have narrowed my search for a car down to 4 and none of them are pickups!
Ford Kuga (like my mrs has)Ok then wot are they...
Ford Kuga (like my mrs has)
Mitsubishi outlander
Suzuki Gran Vitara
Mercedes Vito Van
Ford Kuga (like my mrs has)
Mitsubishi outlander
Suzuki Gran Vitara
Mercedes Vito Van
All of them, they only make the list if they are capableWhich of them has a tow bar and can tow your trailer.
J
T'day I will be mostly doing Dads shopping ...
Checking No 1 son's scribblings for his exam ....
And doing me timing belt on the Vauxhall Old Skip ...
Wish me luck ...
Ah, not such a good day thenWell, it could have gone better and it could have been worse ...
Managed to snap the plastic bleed valve thingy in the rad topic...
Found out that the rear springs and shocks are shot, so that's next weeks chore ...
Got completely soaked in the downpour ...
Ah, not such a good day then
Hope he does as well in this then!Part of his Engine Earing thingy course, some module or other, he got 98% in his Maffs last week…
Looks very good!!!.. that today (after the tiling in the bathroom) I managed to get out to my little workshop to continue working on the 2WD "Freewheel" unit
The bolts ordered for the "bolt-cage" have failed to turn up View attachment 260848, so I decided to drill out the adapters for a 16mm axle size instead. I really didn't think my little lathe would be able to do it, but it did.
16mm is a truly monstrous hole to drill through a big round bar. I really need the axles on either side of the freewheel to be aligned so the 4-jaw chuck accuracy was adjusted to <1Thousandth of an inch prior to drilling commencing. I intend to assemble the unit with a short section of 16mm axle in place through both adapters to ensure the best alignment.
I did the drilling operation in progressive steps (4, 6,8,12 and finally 16mm).
It came out quite well I think. View attachment 260849
Wiv yer tratter onnit?Well, I can now say I have actually been in a Freelander it towed my trailer job jobbed!
Nah, it wouldn't have managed it lolWiv yer tratter onnit?
Morning.. its ****ed it down here and I only got half my wood in Lincoln has the same rainfall as Jerusalem apparently.Morning all, tis a silly time to be up. At least it is dry atm
Have a great weekend!
It actually started raining about 10 minutes after I posted it has dried up again now.....Morning.. its ****ed it down here and I only got half my wood in Lincoln has the same rainfall as Jerusalem apparently.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!