I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kermit_rr said:
It's the company, not the individual manager that's the problem, HR will be on his side
Click to expand...
HR is ALWAYS on the company's side, no point in employing them if not!
Both I and @Bobsticle have posted on this sort of topic before as we both have had run ins with management.
You need to get tooled up, which means doing your own research, both of employment law and into how the rest of the company's staff is being treated, as well as the new Covid regulations. Only good union reps are much use, and I have only ever known one who was, so don't worry about not being in one.

PS, if it's the company not him, try and make the point, does he want to carry the can for the company if this blows up in his face? If he's a bully very often he'll be a coward as well. I have found there are two sorts of bullies, cowards and psychopaths. With the latter you have to be more logical. but they hate being made a public spectacle of. and yes I have had to deal with both types!
Headmasters? Who'd have 'em?
 
jamesmartin said:
spill the beans about wooden bomb sights
Click to expand...
They never used them.
The bomb aimer, at low level couldn't use them as they were being shaken about too much. Low level flight is too bumpy, and they had to hold onto the bomb release toggle as well. So they developed a coupla ways of doing it, but simply they had a bit of cord tied to two bolts or rivets either side of the perspex which the aimer held to his nose, so it made a V. He had previously made marks on the Perspex, with a chinagraph pencil. There were other similar home made devices. When these marks lined up with the two towers, as he knew his eyes were at the right distance from the Perspex to give him the correct position, he released the bomb.
According to this
https://dambustersblog.com/2008/05/14/the-bombsight-used-to-break-the-mohne-dam/
one bomb aimer actually did use the Dann sight, but the others gave it up as they could not hold themselves in position.
 
Shimsteriom said:
My sleep patterns are still awry after preparing for the failed night shift job. :rolleyes:
Click to expand...


And ya fires gone out :eek:


Plenty of shift work here in the distilleries. They are great shifts that would suit you just fine ;)

06.00-14.00 one week, then 22.00-06.00 the next followed by 14.00-22.00 the next and repeat :)

When they are going flat out you could finish 06.00 on Saturday morning then be out 14.00-22.00 Sunday
 
Def90man said:
Plenty of shift work here in the distilleries. They are great shifts that would suit you just fine ;)

06.00-14.00 one week, then 22.00-06.00 the next followed by 14.00-22.00 the next and repeat :)

When they are going flat out you could finish 06.00 on Saturday morning then be out 14.00-22.00 Sunday
Click to expand...
I got knackered just reading that!
 
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
906
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
1K
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
1K
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
724
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
1K
TITCH SANDERS
TITCH SANDERS
Back
Top