- Posts
- 9,087
- Location
- North Lincs
I have the window open and the fan on, clock watching already and I have only been working for two hours!
I have the window open and the fan on, clock watching already and I have only been working for two hours!
She is non functioning, I am stripping her down to weld up the bulkhead and floorsHow is the 'Drover running you gerring her muddy?
She is non functioning, I am stripping her down to weld up the bulkhead and floors
I agree, it is what I did 16 years ago and the softwood has lasted. Good luckAm er bowt ter start wukin ont me dor. Am finkin ov payntin the frame befor eye puts the planks on front, so it be more wevva proof. Am also finkin ov payntin the planks ont front before fittin them anorl. Then purrin er nuvva coat of paynt ont all ovvit afta. Wot deos yer fonk?
Prime the tongue and groove before on the panels before assembly as otherwise when they shrink you’ll be left with a bare strip of timber on showAm er bowt ter start wukin ont me dor. Am finkin ov payntin the frame befor eye puts the planks on front, so it be more wevva proof. Am also finkin ov payntin the planks ont front before fittin them anorl. Then purrin er nuvva coat of paynt ont all ovvit afta. Wot deos yer fonk?
Excellent grub stop at Montford Bridge just north west of Shrewsbury on the A5. Big cafe in pleasant park surroundings, good grub, eat inside or outdoors. Was an annual stop off on me run with a van full of bikes on the way to Anglesey Circuit, now sadly no longer on my route.Back into wales..,,, parked up at a snack van as just been informed they now open at 8
Its 3 cans past beer o'clock. Didn't make the same mistake as yesterday, worked too long in the sun and got dehydrated . Adjusting my moisture content quite nicely today thank you .It’s almost beer’o’clock
Got the same problem, Wickes are out of stock of me bricklayering sand, I only got a 130 or so bricks to lay n finish the job and I won't use a different sand cos it will look odd when the mortar sets n dries. That jobs been on hold over a month now but got loads of other stuff done and still going.I have been trying for 2 weeks to get timber for a small building project.
Weathers’reet ansom ere. It’s almost beer’o’clock
You is eatin a lot later than us, and we don't rush it. but the weather is amazin isn't it? How is you going to cook 'em?It’s already 4 pints past here and time to cook a couple of nice duck breasts
J
Chop its head n feet off, wipe its 4rse and eat itHow is you going to cook 'em?
Happens all the time in Frogland when peeps makes shutters!Prime the tongue and groove before on the panels before assembly as otherwise when they shrink you’ll be left with a bare strip of timber on show
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!