Sunday 10:00 Jansel House A505 Stopsley, Luton
On the roundabout as you come from Hitchin.
Start local and see how far we get.
Hi mate, i've got a Mondeo Ghia X 2.5 V6 as a bit of toy, power chipped, induction kit and power flow twin out exhaust system. Puts out about 230 BHP. Not as good as when they fit the same engine in the Noble sport car with twin turbo's putting out 420 BHP, but still quick enough for a scrapped Porschs project engine.I Will need to get to work at some point, My boss used to have an Alfa, before he got his Porsche. I was Picking him up on my way in at least once a week cause it was broken :doh:
Hi mate, i've got a Mondeo Ghia X 2.5 V6 as a bit of toy, power chipped, induction kit and power flow twin out exhaust system. Puts out about 230 BHP. Not as good as when they fit the same engine in the Noble sport car with twin turbo's putting out 420 BHP, but still quick enough for a scrapped Porschs project engine.
Sunday 10:00 Jansel House A505 Stopsley, Luton
On the roundabout as you come from Hitchin.
Start local and see how far we get.
Hi mate, i've got a Mondeo Ghia X 2.5 V6 as a bit of toy, power chipped, induction kit and power flow twin out exhaust system. Puts out about 230 BHP. Not as good as when they fit the same engine in the Noble sport car with twin turbo's putting out 420 BHP, but still quick enough for a scrapped Porschs project engine.
The original M12 GTO Noble had the 2.5, they didn't start fitting the 3.0 untill 2003.thought it was the 3.0v6 they used in the noble
I'll pack my sleeping bag then.Up for Sunday... should be seeing you all at J house at 10! Will try to get the CB fitted tomorrow then!
i see 1 o them on the motorway.nice lookin motor for what it isThe original M12 GTO Noble had the 2.5, they didn't start fitting the 3.0 untill 2003.
http://cgi.ebay.co.uk/Tirfor-winch-..._Lifting_Moving_Equipment&hash=item4aa8d982bahttp://cgi.ebay.co.uk/Tirfor-winch-..._Lifting_Moving_Equipment&hash=item4aa8d982ba
I had a quick go at it last week. Managed to unbend the Z shaped bit of wing with g-clamps and lengths of wood so it points roughly downwards, but its stll fairly crumpled. When I get some more time I'll try annealing it and beating the larger lumps out of it, but instead of doing that I ended up sorting my indicators instead. It turned out not to be a bulb or dodgy earth for once, but a problem with the 12V feed. I'm assuming it was a loose bullet connector (I was getting voltage, but no current flow) but I coudnt find it, so ended updoing a re-wire instead. I havent pressure washed it since we went out so it wasnt a fun job with lumps of mud falling in my face when I was running the new cable down the top of the chassis member.
Thanks for the frank advice Andy! Just wanted to see if Icould find something in my price range to get me out of trouble without any bells or whistles....
Up for Sunday... should be seeing you all at J house at 10! Will try to get the CB fitted tomorrow then!
Sunday 10:00 Jansel House A505 Stopsley, Luton
On the roundabout as you come from Hitchin.
Start local and see how far we get.
sorry we cant make it .I am stripping for baulkhead replacement or repairs dependant.
ripped the bloody door off.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!