jcuk
Active Member
- Posts
- 257
- Location
- Wigginton, Hertfordshire
Hertfordshire Lanes?????
- Thread starter 99claydond
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
landroverjack
New Member
- Posts
- 3,282
- Location
- NW Scotland
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Right gonna start me roof swap! bloody early!
tdcist
Active Member
- Posts
- 214
- Location
- North Herts
I'm glad I'm not the only one up early on a Sunday!
BenjyP
New Member
- Posts
- 186
- Location
- Shropshire
Well Front Valence now gone just tidy it up a bit (ie that rusty bar ) wire brush it then Hammerite I think then when the steering guard come it will come off
all that was attached to it was the bottom of the valence
That's what a disco should look like!! Automatically increases approach/departure angles and looks like it should be in the mud not on a motorway!! One of the best/cheapest mods I've done!!
Just save your fog light wiring ready for your spots/roof lights!!
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Roof unbolted and wiring all undone except 2 wires then its bolt and jack straight Sibles old truck cab Roof which should be loadsa fun hehe
BenjyP
New Member
- Posts
- 186
- Location
- Shropshire
Sounds like you're having more fun than me Jai... I'm sat at work with 500 kids ready for a thrilling hour and half of Thomas the Tank engine!
landroverjack
New Member
- Posts
- 3,282
- Location
- NW Scotland
Do you get a little train to drive around this time? lol!
BenjyP
New Member
- Posts
- 186
- Location
- Shropshire
2 quite large trains actually... Made from fork lift chasis' but we're not allowed to drive them as they're about
tdcist
Active Member
- Posts
- 214
- Location
- North Herts
Sadly not jack... They aren't so happy with us driving things around on this one lol
landroverjack
New Member
- Posts
- 3,282
- Location
- NW Scotland
After you got the last one stuck in the car park? :hysterically_laughi
tdcist
Active Member
- Posts
- 214
- Location
- North Herts
Hey! That's one vehicle I didn't get stuck I'll have u know jack!!!
I drove the 58" series 2/3 hybrid perfectly!!
I drove the 58" series 2/3 hybrid perfectly!!
landy1uk
Well-Known Member
- Posts
- 1,775
- Location
- Hertfordshire
I think it look better like this that bar I think is just to hold the valece on but gonna leave it untill I get a steerin guard.
Probley save a bit of fuel now as the amount of plastic behind causing a
barrier to cause wind resistance lol
Lucky enought there is a multiplug for each side just got to cover the ends now until i put some spots in the grill was gonna use the fog lights as they still work but they are shaped and the drivers side one all the brackest got mangeled when i cliped the bank that cracked evrything, will have a closer look at them once they ar cleaned see if i can modify them
A Better Picture
Last edited:
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Sible your Truck cab was Propper bent! Took ages well ALL day to get it to even look like it was going to fit. Highlift, big boots, big hammers and blocks of wood got it in to a sort of shape. Anyways its fitted and should be seen in action at a few comps over the next couple of months. Many thanks to Spitfiremk1uk and my old man for loadsa of help (and more big boots) still some bits to finish but the main chunk of work s done!
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Ash how was Whaddon?
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Gotta change my rear springs far too hard for no weight/hardtop like a bloodt racing car solid suspension
sible88
New Member
- Posts
- 3,492
- Location
- Hertfordshire
Jai I am glad you said about the suspension I thought it was my mind playing tricks on me lol hard as f**k. As for the roof why didn't you fit it then wack it into shape so you know u it is always gonna fit how ever hard u wack it.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
The only straight edge was the back edge where it was bolted to the rear cab and the whole lot was a parralelagram one corner was crumpled over an the ther was also crumpled. there was a foot gap between where it should have fitted my screen before we got it to a sorta shape.
To answer your question simply. I like my windscreen and bolting it to it would put serious strain on a weak frame and only 3 of the bolts would have bolted up properly the rest was so outter shape will post pics tomorrow
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Its far from nice its ok all bolts fit and its structually strong it looks batered and bruised and I guess thats a bonus as I wouln't take the comps so serious or try as hard if it was £250 worth of shiny panels. All in all I have a vehicle 90% ready for this years comps so I'm happy few more bits n bobs and I'll be really happy to have a good go at the comps especially as a couple of good sites are coming up in the next month or so.
ashb321
Active Member
- Posts
- 200
- Location
- hemel hempstead
Very sticky but good fun.
