Hertfordshire Lanes?????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thinking of ideas of challenges to do I have an idea its called don't drop the wheelbrace:

[nomedia="http://www.youtube.com/watch?v=dvBDeaUMddI"]YouTube - Crazy Saudi[/nomedia]
 
Buy plenty, we'll see who gets further, Gary Glitter in his Silver Disco or Me in my Series.

That was short but sweet. I sat back for some controversy but it never really happened, so it'll be a no from me, I'm afraid.

JudgesITV_468x282.jpg
 
anyone about tomorrow morning for laning ? we are heading to buldock way for 10 and heading our way across to stevenage , there is two of us so far , anyone welcome as we not been this way laning before

Sorry mate, can't join you I'm working :(

Thinking of ideas of challenges to do I have an idea its called don't drop the wheelbrace:

YouTube - Crazy Saudi

OMG ... were all those people inside the car when it started? How do they get the wheels that are in the air not to spin?? How do they cling on when they stop?? :eek::eek:
 
Well Front Valence now gone just tidy it up a bit (ie that rusty bar ) wire brush it then Hammerite I think then when the steering guard come it will come off:D:D:D
all that was attached to it was the bottom of the valence
Landy1uk.jpg
 
FFS..... So I am getting these wolf rims and need longer wheel studs for them but I can only find them for about £5 each plus delivery online?! I will obviously need 20 of them so thats £100!! What am I gonna do? Ebay sellers are doing the standard ones (just 20mm shorter for £3 for a set of 5!!!!!!) HELP! Paddocks don't stock them...

Part number: FRC7577
 
Jack mount them on th ewolf rims bolt them on and see how bad they are. Officially Yes you need longer studs and its inadvisable to run without them but you will be ok. next time look what wheels I'm running
 
Cheers Jai, I sent an enquiry to Zeus.. Would the wolf rims fit inside out until I can afford long studs? Don't think I'd really want to run them with studs 20mm shorter than they should be... 2cm is about the thickness of a whole wheel nut! :eek::mad:
 
No! don't be turning the wheels inside out! That IS dangerous and will cause wheels to fall off!

Ok just fit them as you would normally make sure the tapered nut goes on as normal taper facing towards the hub and goes into the taper on the wheel you will be fine. the Wolf rim is a few mm thicker than std. I would buy new studs and ideally fit them asap however fit the wheel and see what you think before you think about alternatives. The only real answer is fitting longer studs they are expensive however its the only real answer.

I've know Wolf rims to be run on Std studs for 10's of thousands of miles no issues.
 
Back
Top