B3aker
Well-Known Member
- Posts
- 1,425
- Location
- Cambridgeshire.
I'm about tomorrow. Not about the rest of the week though.
Hertfordshire Lanes?????
- Thread starter 99claydond
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Spitfire I dug out my snow chains I think one of the rotating loops has parted I think I cant remember which one it was but there is another set in the garage at pops there is defo 3 good ones and one bad one (from my set). Either way I'll drop off the ones that I have here tomorrow morning before work and I will repair the broken loop
stariont3
Active Member
- Posts
- 200
- Location
- luton, beds
oh, and my mates prob was the transfer box- now jammed in low range 
-- Jai, would you have a transfer box for a 300tdi defender??
-- Jai, would you have a transfer box for a 300tdi defender??
Last edited:
B3aker
Well-Known Member
- Posts
- 1,425
- Location
- Cambridgeshire.
Ah thats not good. You both made it home ok though?
krsmayo
Active Member
- Posts
- 223
- Location
- ware, Herts
i'm going to try the N/A snorkel kit from these i think
Raised Air Intakes / Safari Snorkels for Land Rovers
Raised Air Intakes / Safari Snorkels for Land Rovers
stariont3
Active Member
- Posts
- 200
- Location
- luton, beds
krsmayo- the universal one looks like the one for you :biggrin1:
beaker- got back ok thanks- i dont think he is too happy lol
beaker- got back ok thanks- i dont think he is too happy lol
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Stariont,
I haven't got one here but could probably get one or more likley a Discovery box (higher high range) er but it would be about £130 my source is expensive but he only takes out ones he knows is good.
I haven't got one here but could probably get one or more likley a Discovery box (higher high range) er but it would be about £130 my source is expensive but he only takes out ones he knows is good.
stariont3
Active Member
- Posts
- 200
- Location
- luton, beds
cheers jai, i have sent him a message, so i will let you know
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Are you sure its the box itself I had mine stuck in Low range once but I broke the linkage my own fault
stariont3
Active Member
- Posts
- 200
- Location
- luton, beds
he had a strange noise all the way back, and his transfer box has dumped its oil all over his drive way.
he did replace the linkage last week i think??
he did replace the linkage last week i think??
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Oops! if it was adjusted incorectly then..............
Oh well I can probably get him an LT230 box but it will be about £130 and it may be a disco 1.22 opposed to 1.4. Its a common swap and is supposed to save fuel and caning the engine at high speed.
If he needs one shout but he might be better looking on Ebay but its a risk good or bad.
Jai
Oh well I can probably get him an LT230 box but it will be about £130 and it may be a disco 1.22 opposed to 1.4. Its a common swap and is supposed to save fuel and caning the engine at high speed.
If he needs one shout but he might be better looking on Ebay but its a risk good or bad.
Jai
stariont3
Active Member
- Posts
- 200
- Location
- luton, beds
i will let him know- cheers jai
offroader84
New Member
- Posts
- 223
- Location
- ware,herts
sounds like today was good fun,wish i could of been there,cant wait to see the pics.
i've spent the weekend removing the carpet from the rear floor of my disco and checking for rust and also looking over the sills and chassis.
Good news is the chassis are fine but rear floor,sills and body mount brackets to be replaced so alot of work on my hands.theres pics here.http://www.landyzone.co.uk/lz/f8/disco-1-rear-floor-rottern-93264.html
atb lee
i've spent the weekend removing the carpet from the rear floor of my disco and checking for rust and also looking over the sills and chassis.
Good news is the chassis are fine but rear floor,sills and body mount brackets to be replaced so alot of work on my hands.theres pics here.http://www.landyzone.co.uk/lz/f8/disco-1-rear-floor-rottern-93264.html
atb lee
B3aker
Well-Known Member
- Posts
- 1,425
- Location
- Cambridgeshire.
lol, Replied, didn't hear it go offt :doh:
offroader84
New Member
- Posts
- 223
- Location
- ware,herts
has anyone got a spare wheel carrier for discovery1 they want to get rid off.
Glenn321
Active Member
- Posts
- 411
- Location
- hertfordshire
I had the same problem mate, my 90 is a C reg was a N/A now changed the engine but like you had no vents on the wings. I cut my own out very tidy job wouldnt have noticed the difference and the safari looks far better and does make some added power due to the ram air. I would advise cutting the whole yourself if you want a hand or want me to do it more than willing. and the Safari i have will be cheaper than those on the link only want like a 100 for it. let me know even if you need a hand fitting the one above. if your up for some local lanes to us some time would be good, there are some ok lanes.
Glenn321
Active Member
- Posts
- 411
- Location
- hertfordshire
Yep it sure does, I'm at work at the min but will post the number up here when im home mate.
krsmayo
Active Member
- Posts
- 223
- Location
- ware, Herts
krsmayo
Active Member
- Posts
- 223
- Location
- ware, Herts
