tonyburchell
New Member
- Posts
- 14
- Location
- broadstairs, kent , UK
Hi Ive seen that there is a led light that shows the BECM wakes up but where is it on a manual please. Ive looked but cant find it. I bet it right under my nose.
BECM awake light on a manual
- Thread starter tonyburchell
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kds
Well-Known Member
- Posts
- 2,337
- Location
- old,ugly, tired in Lincoln.
Could be wrong (nothing new there !) but think its only on autos, mines manual and only light I have is the one on top of the dash.
- Posts
- 16,482
Autos Only....
Top of Dash Lamp is the Alarm visual indicator/deterant lamp
Top of Dash Lamp is the Alarm visual indicator/deterant lamp
sas1810
New Member
- Posts
- 1,347
- Location
- back in Willenhall, West Midlands.
BECM light on anauto lights up next to the gearlever when in Park.
aerofabrique
Active Member
- Posts
- 581
- Location
- UK
For the manuals you will have to hook up the ammeter to the battery and do it the old fashioned way to test the BeCM waking up and sleeping. Besides which will you a more accurate picture
tonyburchell
New Member
- Posts
- 14
- Location
- broadstairs, kent , UK
Thanks for all your help.
I'll do it with a mutimeter then to make sure it go asleep. unless i can put it on the BECM it self.
I'll do it with a mutimeter then to make sure it go asleep. unless i can put it on the BECM it self.
rasheed
Well-Known Member
- Posts
- 1,815
- Location
- Bangladesh
just remember it needs 2 - 4 minutes to fall asleep. should then draw about 0.03A if i recall correctly. and remember the problem isn't so much about whether it will go to sleep as it is about how often does it get woken up.
dave4x4
Active Member
- Posts
- 360
- Location
- Chester, England
I have timed the BECM on my 2000 DSE auto.
It takes exactly 2 mins to go asleep. I found having the bonnet open doesn't effect the time either. Starts off at 0.63A then drops to less than 10 mA.
It takes exactly 2 mins to go asleep. I found having the bonnet open doesn't effect the time either. Starts off at 0.63A then drops to less than 10 mA.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,898
- Location
- Buckinghamshire, UK. ('95 DT)
Having the bonnet up didn't make a difference? Now there's a surprise.
dave4x4
Active Member
- Posts
- 360
- Location
- Chester, England
No difference. I just locked the car on the fob and it took exactly 2 mins to go asleep with the bonnet both open and also closed. Of course the alarm beeped with it open.
I made a plug to activate the bonnet switch to the closed position when it was actually open so I could measure the current easily.
I made a plug to activate the bonnet switch to the closed position when it was actually open so I could measure the current easily.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,898
- Location
- Buckinghamshire, UK. ('95 DT)
And when I was looking for current drain I put the car battery under the car using my jump leads to connect it to the car!
Wasted effort, it seems!
Well, I'll know for the future.
Cheers,
J
Wasted effort, it seems!
Well, I'll know for the future.
Cheers,
J
tonyburchell
New Member
- Posts
- 14
- Location
- broadstairs, kent , UK
Thanks for your help
Similar threads
