Search results

Ahh get it! Thanks.

Just picked up kids from Panto! Robin Hood apparently:) Got nearly home, pulled out of a junction and heard a shuddering from (I believe) the rear and then lost all drive:mad: Very ****ed off as 1st major problem in exactly a year of owning her....been lucky maybe :o From what I have...

May be nothing, but are both rear brake/indicator bulbs double filament? I put in a single filament bulb and when I braked with the lights off, the voltage goes back through to the side lights.!

Mick, think I understand you description, sounds like we have similar issues, please post if you fix it...thanks

James, I think I understand you, however to move the bottom of the bulkhead backwards, hence lifting the door up at the bottom, do I need to undo loosen off any other bolts? Exactly how many bolts hold on the bulkhead on either side? Do I need to loosen the roof to the windscreen? Btw all hinges...

I am so interested in this as well, as I have been on all search engines possible to find a decent how to, or write up about adjusting the bulkhead to achieve the correct door fitting! I too have a dodgy drivers door fit, all the others are ok!? Piccy attached

Maybe that's what the x stands for in Xgem!

Lovely, eaten cold as well, beans are great cold!

Beans are nothing without them little sausages! Also branston beat Heinz hands down....and of course free range eggs ( I am from Harrogate you know!)

Apparently you should put the steering on full lock before adjustment as well, as it will be less worn than the centre point of the box. This will ensure you over tighten the box at its least worn section..

Good old defender electrics! Mine ran on after I had put the wrong bulb in the rear stop/side light! Put in a single pole bulb instead of double pole! So when the side lights were on, a live voltage went back through the brake light circuit to the ignition and to the ip stop solenoid so the...

Hey Tom you around tomorrow? Would like to have a butchers if poss?

Not much, taken off the roof rack, seems to go 5mph faster without it! Gonna paint it black before I put it back on.. Gonna check the timing when I get that bloody wading plug out....wife has had me decorating all the time! Happy new year..

Tom, sun? Snow up here mate!

I was lucky with this...hardest part was removing the old BJ ....... the drop arm came off OK when I used the two mallet trick:D

;) Plenty of tips if you search this forum..;).with mine I started with changing worn UJs in the steering column and then went down to the steering arm Ball Joint...eventually changed all the bushes on the suspension to get as good as new......however you may also have a knackered Steering Box...

With a pipe connected to the sun visor! Red wine on a drip feed. One drip per 10th of a mile!

I have installed a flat screen LCD and a drinks bar

I am not an expert but sounds like it could be a dodgy fuel stop solenoid?

Typical...stopped doing it now, so cannot trace... However, it may be connected to another electrical problem that raised its head yesterday, and I am sharing this in case any other dimwit does the same as me!!!! When I touched my brakes the dash lights came on!! I realised after head...