Search results

Seems to me as pointed out, the link rod that connects the handle mechanism 5 to the latch assembly 21 may well have problem, diagram below is the same type of lock, the top of 15 is the bit that pops up and down on to of the door card.16 is the rod that links the handle assembly to the latch...

If you are lucky whoever worked on it may have not plugged in the drivers door lock central locking connector fully, or it may have come off. The door card has to be removed and the electrical connectors need checking. If you search you tube for 'Freelander door card' people have uploaded...

Never heard of the words worn and dangerous on an advisory, that is some uj play you got there.

You were unlucky enough to have opted for the most unreliable engine put in any form of Rover.

If using 2 fuses of the same rating ok. but remember the 2 slots are NOT the same thing. If you find yourself removing a 15 amp fuse from the engine fuseboard to piggyback a 5A, the 15A and 5A fuses have to go in the correct piggy back slots before the piggyback is pushed into the fuseboard. The...

You like it then.

Hope it is one that lasts ages, some do.

The lock assembly has 2 actuator motors. I used to think actuators packed in unlocking, because they ran the same single pole motor backwards to unlock, burning it out. But, the unlock motor that tends to burn out (covered in dust and the insides dropping apart) is made by a different company to...

It is possible it may have done who knows what to the damper that goes along the bottom of the door, or a hinge. Doubt that you slammed the door, but hard to say how much fulcrum point force was put by the wood on the door, that is frameless, holds a spare wheel, and is damper assisted. Ok they...

Try disconnecting the battery and re connecting again after 5 minutes. What is the battery voltage. Are you quite religious, do you know all the start sequence clicks and visual sequence of events, prior to pushing the start button. If not what exactly do you see and hear

last year I put one of my motors in the garage when I got home, came to get in it next morning to find a 18" crack across the screen. Hard to believe anyone opens the back door without even subconsciously looking at the window. Electronics wise, there are too many components and safety features...

They are a warm air cabin heater for boats, motor homes, portacabins etc, used in truck cabs that have living quarters. Poinless in LR etc, unless you plan sleeping in it during winter MO. Thermo Top water heater type is the only way to go for your motor. They can be adapted to work, but would...

-30!!! yeh right. -3 is plenty cold enough for me. Not that I would want to live anywhere cold, but if I did I would fit a 2nd FBH.

If ok when being used and the engine is warm to normal temp, sounds like it is the starter motor, when the starter is cold all the bits contract, turning a thin contact into an open contact. Good chance you will get the click click in the morning. Have also known it to be thin contacts in the...

Sounds like air flow, have you tried a different MAF sensor

I'm with Nodge on this one. 1.8 would warm up quicker, Td4 would need a FBH running in winter for as long as it takes to make your journeys, engine would still not be up to running temp when you got back. Td4 is noisy compared to a 1.8. If I was given a choice between a 1.8 and Td4, the Td4 was...

When you say " I can then open the doors from the inside." what do you mean? how do you unlock them from the inside, door handles or the cabin door lock/unlock button. Does it have KVM, how do you unlock the doors when locked?

Engine is the same, so you are ok,

SWMBO the exact same problem, rubbish quality push on push off switches. If she asks me to fix it, I will fit some better switches to the PCB.

I reckon it will fit and be stable enough with a pair of lightweight stainless spots/fogs. I also reckon it is non approved, therefore illegal to fit to a vehicle for highway use for the past 10 years. Seller selling as 'Off Road' You can fit one, and be fine, police do not have the resources...