FL1 Courtesy/Map/Interior Light Switching Fault

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

kernowsvenski

Well-Known Member
Posts
1,619
Location
Truro
I've got the seemingly common interior light switching problems. The passenger map light works but driver's side doesn't. The courtesy light works when the doors open but it doesn't with the interior switch. All bulbs are okay and the connections between the loom and pcb are fine. I've gone through a few threads and I would like to check the earth point(s). I've looked at the wiring diags on Rave but they are a little on the complex side for me. Can anyone tell me where the earth point is on the vehicle?
 
I've got the seemingly common interior light switching problems. The passenger map light works but driver's side doesn't. The courtesy light works when the doors open but it doesn't with the interior switch. All bulbs are okay and the connections between the loom and pcb are fine. I've gone through a few threads and I would like to check the earth point(s). I've looked at the wiring diags on Rave but they are a little on the complex side for me. Can anyone tell me where the earth point is on the vehicle?

If one map light is working, the earth is ok. It'll be the little switches in the light. Use some contact cleaner and operate the switches a few times. ;)
 
Back
Top