I've asked JC600 if he can fix the issue, or host the lost images right here.
Freelander 1 Wheel Identification Library
- Thread starter Nodge68
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I've asked JC600 if he can fix the issue, or host the lost images right here.
tlo
Active Member
- Posts
- 558
- Location
- nottingham
Not sure if this is the right place to ask but if you are changing wheels say 16 to 17" wheels is this going to effect the speedo
It a useful question to ask on this thread.
The answer is, it depends.
With the standard 215/65/16 tyres, the FL1 speedo will show about 10% faster than the actual speed. This was done to eliminate under reading with all available wheels.
The 16" size wheel with 215/65/17 tyre is 27" in diameter.
The 17" size wheel with the standard 225/55/17 tyre is 26.75" in diameter.
So you can see that the speedo will become more inaccurate on the standard 17" rim/ tyre combo to the tune of 12% over read.
I am currently using a 225/60/17 AT tyre on my Trek rims. This gives a diameter of 27.6". The speedo is more accurate with this size at about 6% over read.
So basically there's no need to worry about the speedo, unless very large tyres are fitted.
JC600
Well-Known Member
- Posts
- 1,103
Flhunter
New Member
- Posts
- 4
- Location
- Chesterfield
Is there 2 different size wheel nut sizes? My original nuts don't fit my new spacers
There are 2 types of wheel nut used on the Freelander. The steel wheel nut is a short open nut and the alloy wheel nut is a taller and fully enclosed nut.
Flhunter
New Member
- Posts
- 4
- Location
- Chesterfield
My threads on my spacers are too wide to put my nuts on
kernowsvenski
Well-Known Member
- Posts
- 1,621
- Location
- Truro
I think the 18" sport rims are the best looking option on the FL. Although, I do like those Vortex ones. I have seen one or two cars with them on but assumed they were FL2 wheels fitted. I didn't realise that style was on option on the FL1.
I'm happy with my Evolotions though. Considering how ****e three spoke alloys looked in the Max Power days I think the Evolutions have stood the test of time.
I'm happy with my Evolotions though. Considering how ****e three spoke alloys looked in the Max Power days I think the Evolutions have stood the test of time.
Do you mean the nuts don't go on the spacers you have?
If that's the case, then I suspect you have the wrong spacers. All FL1 studs are 12 X 1.5mm threads. Later LRs have 14 X 1.5mm threads.
andyfreelandy
Well-Known Member
- Posts
- 5,609
- Location
- Devon
Vortex 17 inch with 225 / 65 17 GO15 Yokohama tyres.
Speedo is pretty much spot on. Reads about 1 mph low at 70mph.
Speedo is pretty much spot on. Reads about 1 mph low at 70mph.
Last edited:
Henry_b
Think outside, no box required.
- Posts
- 15,523
- Location
- somewhere else
I had 5 spoke Freedoms on my 1.8 XE..
Arctic2
Well-Known Member
- Posts
- 2,759
- Location
- Westmidlands
Landy86
New Member
- Posts
- 1
- Location
- Felixstowe
I have a 56 plate FL1 Sport td4 with 18 inch alloys and was wondering if I could put a smaller fl1 set of rims on it so I can get AT tyres as am struggling to find any to fit my current rims? Any help would be good.
Any smaller FL1 rims will fit, but a Sport isn't really suitable for off road, if that's what you want to do. The suspension is too low and too stiff, which makes it less than ideal.
Best bet is to sell the premium priced Sport, and buy a cheaper non Sport model.
However there are some decent tyres available for the 18's, if you're not planning on going off road.
Wet Cubbyhole
Member
- Posts
- 28
- Location
- Macclesfield
Great thread this.
Can anyone see why I can’t fit 235/55 R17’s to the BBS Vortex rims?
The diameter is less than 1% bigger than current 215/65 R16’s abs my research on here suggests a 235 will not foul the spring cup. However is 235mm too big for the 7j rim?
Can anyone see why I can’t fit 235/55 R17’s to the BBS Vortex rims?
The diameter is less than 1% bigger than current 215/65 R16’s abs my research on here suggests a 235 will not foul the spring cup. However is 235mm too big for the 7j rim?
Depends on what you are trying to achieve?
I think 55% tyres look too small in the arches, as the proportions are all wrong in my opinion.
I think 225 60 or 65 R17 look more in proportion I the arches. These sizes also make the speedometer more accurate, and allows for more AT orientated tyres, like the Yokohama Geolander AT 015, which are about the best available all round tyre at the moment.
Wet Cubbyhole
Member
- Posts
- 28
- Location
- Macclesfield
I’m just trying to achieve a better look and maintain a smooth ride. I agree the cars look better when the arches are filled although a 65 profile is a bit too much sidewall for my liking.
andyfreelander’s 65’s on the Vortex look good though I have to say. I’ll have to do more pondering
However could you advise on whether 235’s will fit on a 7j rim? Some websites say no, others say they will???
andyfreelander’s 65’s on the Vortex look good though I have to say. I’ll have to do more pondering
However could you advise on whether 235’s will fit on a 7j rim? Some websites say no, others say they will???
