new to all this
Well-Known Member
- Posts
- 243
- Location
- East Sussex
MOT pass today following a new bulb and welded exhaust brackets. May keep her now but still up for sale
Other what have u done on ur disco today
- Thread starter gstuart
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hicap phill
Well-Known Member
- Posts
- 16,527
- Location
- Wiltshire
Met up with a friend on way to wales for green laning.
GrumpyGel
Well-Known Member
- Posts
- 26,765
- Location
- Christchurch, New Zealand
The lid on that trailer will be really heavy to lift with that tent on it.
Hicap phill
Well-Known Member
- Posts
- 16,527
- Location
- Wiltshire
Nope.. there are 2 rams on it. I thought it would be heavy but it lifts up on its own.
Think the struts are twice as powerful of the classic RR tail gate
I would worry more about changing them tyres
Hicap phill
Well-Known Member
- Posts
- 16,527
- Location
- Wiltshire
After some info…
So on my travels I saw a disco 3 or 4 with roof tent etc. the rear window was removed and a hatch put in its place. Looked like a made part.
Any 1 know who makes these?
(Unable to take photos was driving) Thanks
So on my travels I saw a disco 3 or 4 with roof tent etc. the rear window was removed and a hatch put in its place. Looked like a made part.
Any 1 know who makes these?
(Unable to take photos was driving) Thanks
- Posts
- 381
- Location
- Cheshire
Passed her MOT with no advisories after failing with a knackered rear suspension arm and a small hole in the sill, £400 later all fixed.
I put two Pirelli scorpions on the front thinking it was going to breeze through.
Clean bill of health for 2025 and the tester remarked that the vehicle was in “ mint condition “ for a near 20 year old D3.
Mileage: 137,033
I put two Pirelli scorpions on the front thinking it was going to breeze through.
Clean bill of health for 2025 and the tester remarked that the vehicle was in “ mint condition “ for a near 20 year old D3.
Mileage: 137,033
- Posts
- 83,301
- Location
- Embasinga stocæ
Nothing….. for weeks 
- Posts
- 5,748
- Location
- Surrey / Hants border
Oh bugger - my D2 is in for its MoT on Wednesday and I've just found a rather rusty body mount in the area below the drivers seat. That's bound to be a fail. I was looking to see how the side steps came off, as the box sections are rusted through and saw the body mount had gone all crispy.
I've a few weeks before the MoT expires so I was going to cancel and get it sorted, but I think I'll go ahead anyway and see if they find anything else and do it all in one hit.
I've a few weeks before the MoT expires so I was going to cancel and get it sorted, but I think I'll go ahead anyway and see if they find anything else and do it all in one hit.
On my D2, via ebay and £12 incl p&p I replaced the 1st small hose on the way from the Turbo to the Intercooler...
as the old one had developed a 4 inch long split
Just re-checked Rimmers catalogue - looks like you can only buy those 3 parts as one, for £179.11 plus postage
as the old one had developed a 4 inch long split
Just re-checked Rimmers catalogue - looks like you can only buy those 3 parts as one, for £179.11 plus postage
- Posts
- 45,728
- Location
- East Dorset
I bought a silicone set not long ago and I think they were cheaper, by quite a bit.On my D2, via ebay and £12 incl p&p I replaced the 1st small hose on the way from the Turbo to the Intercooler...
View attachment 334428
as the old one had developed a 4 inch long split
Just re-checked Rimmers catalogue - looks like you can only buy those 3 parts as one, for £179.11 plus postage
Checked, loads for about £60
Loafer61
New Member
- Posts
- 4
- Location
- Near Timau, Northern Kenya
Morning everyone, probably a good place for an introduction.
Disco Mk1 TDi owner now fitted with a 3.9 V8 EFi, unimog diffs and axles, Fox Racing suspension plus a NP205 crawler box and a Magnum transfer case. I went for a short drive looking for some soft / wet mud (a difficult ask at times, here in Kenya).
We did get out…
Disco Mk1 TDi owner now fitted with a 3.9 V8 EFi, unimog diffs and axles, Fox Racing suspension plus a NP205 crawler box and a Magnum transfer case. I went for a short drive looking for some soft / wet mud (a difficult ask at times, here in Kenya).
We did get out…
Hicap phill
Well-Known Member
- Posts
- 16,527
- Location
- Wiltshire
Forget the spade… waffle boards for easy departure
Tidy motor.have you still got the radiator in the front(looks tight with that winch there)
This is the second one I've put on, the previous lasted about 3 years.
I think it gets rotted-out by the oily air/mist or drips blown-out by the turbo...(?)
Do the silicon ones resist the oil for longer?
I tend to keep cars for a very long time so would switch to silicon if it improves longevity...
