What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
These arrived from Amazon this afternoon. Exhaust heatshields now secured properly again.

1716657994615.png
 
I did have to pre-stretch the centres using pozi screwdriver (some amazon reviews said the same). Then tapped them onto the studs with a 10mm long socket.
 
At that price, I'll manage!

Spent a few hours today replacing the control valve in my aircon compressor, unfortunately it has to be removed completely - unlike the 3.0l which can be done in situ with some parts moved. Start to finish was just over 4 hours including degas / regas and a good 40 min vac. whilst I was putting the ARC pump and charge air hoses back - there's a boost pressure sensor behind the ARC pump, it looks like someone's been there before as the fixing was broken, no big deal to cable tie it up but for anyone contemplating the job, be aware it's there!

I thought I'd taken photos, turns out I'd taken some long videos of the inside of my pocket:oops:

Anyway, all 'cool' now - evap goes down to -1 deg. C. on fast cool with high side pressure of ~14.5 Bar@ 22deg. C. previously fast cool temperature actually rose to cabin temp and max pressure was 10.5 Bar. It was better on auto but took some time to cool down and never below 4 deg. C. at the evap.
 
Datatek said:
Lock the suspension at motorway height, no more "uppy downness"
Click to expand...
Did a test yesterday locking both P38's at motorway height. Both are 1998 GEMS.

Green P38 always reverts to standard height next start-up. Blue P38 seems to do as you suggest and stays at motorway. Only drove about a mile, so will try again next longer trip. Strange eh ??
 
LR feature or fault? I suspect it's a fault. :)

Got check main beam warning so changed bulb and still dead. Turned the key off and took it out and engine still running.
Seems I can only turn the engine off with the lights off or on dipped beam. Looks like I'm gonna be checking my wiring.
 
pwood999 said:
Did a test yesterday locking both P38's at motorway height. Both are 1998 GEMS.

Green P38 always reverts to standard height next start-up. Blue P38 seems to do as you suggest and stays at motorway. Only drove about a mile, so will try again next longer trip. Strange eh ??
Click to expand...
Check the white connectors at the base of the A post left side. It could also be the height switch module is faulty.
 
Left footwell connectors removed & wires soldered many years ago.

Yes it does have self-leving bypass, but not timer-relay swap. There's was an extra ignition switched relay fixed to the fusebox case when I bought it. Whatever it was feeding was missing, so I used that relay to completely de-power the EAS & timer relay when parked which works well. It's easy to bypass so will try that tomorrow (was actually think the same earlier today).
 
pwood999 said:
Left footwell connectors removed & wires soldered many years ago.

Yes it does have self-leving bypass, but not timer-relay swap. There's was an extra ignition switched relay fixed to the fusebox case when I bought it. Whatever it was feeding was missing, so I used that relay to completely de-power the EAS & timer relay when parked which works well. It's easy to bypass so will try that tomorrow (was actually think the same earlier today).
Click to expand...
If the EAS is completely powered down, it will "forget" the setting is locked. A battery disconnect does the same.
 
Smooth 90 mile trip to the coast, lunch in the sun overlooking the port, then off to hospital to get my ears unbunged. For the first time in years, the EAS threw a wobbly. Strange one, it went to wade height, ignition off and back on and it returned to normal. No fault logged, it's never done that before, maybe it was all the speed humps in La Rochelle that it didn't like. No repeat on the 90 mile trip home.
 
Not mine, set the modulation from 89% to exactly 50% on my mates p38 diesel. He was having hot start issues. He's also got the book up again after we replaced the rh blend motor with a used one, nano says that's gone again, to be investigated at a later date.
 
Datatek said:
Smooth 90 mile trip to the coast, lunch in the sun overlooking the port, then off to hospital to get my ears unbunged. For the first time in years, the EAS threw a wobbly. Strange one, it went to wade height, ignition off and back on and it returned to normal. No fault logged, it's never done that before, maybe it was all the speed humps in La Rochelle that it didn't like. No repeat on the 90 mile trip home.
Click to expand...
Both mine do exactly that. Still cannot find the fault. If I see the flashing leds in time, then I hit the down button and they go back to standard. Cycling the ignition immediately usually resolves it. If I have to leave it at wade height (i.e. nowhere to stop), it then faults needing Nanocom to reset it.

On mine it's usually bumpy motorways, especially where the car gets into sort of floaty up & down oscillations above 60mph. Trouble is, I'm watching the road not the height switch, so I first notice when it beeps with soft fault.
 
Datatek said:
Smooth 90 mile trip to the coast, lunch in the sun overlooking the port, then off to hospital to get my ears unbunged. For the first time in years, the EAS threw a wobbly. Strange one, it went to wade height, ignition off and back on and it returned to normal. No fault logged, it's never done that before, maybe it was all the speed humps in La Rochelle that it didn't like. No repeat on the 90 mile trip home.
Click to expand...
Yep, mine will do that occasionally also.. 💁
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
1K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
493
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
712
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
788
Grrrrrr
Grrrrrr
Back
Top