What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I touched up a couple of bits with the paint pen. However, I think I f%#$ed up , royally, on the door handle. I decided to do a larger area. I duly rubbed it back, with fine sandpaper. Then touch up brush, and brushed on the paint.
Wrong thing to do. It's bumpy. Whivh means rub it back and try again.
So the question is what do others use for areas of approx 2cm x 2cm? A cut down sponge maybe?

All help appreciated :)
 
I touched up a couple of bits with the paint pen. However, I think I f%#$ed up , royally, on the door handle.

All help appreciated :)
I did my lettering with a nail varnish type applicator. If you rub it down and recoat Ito come up smooth eventually. Thinners help to buff it while curing with a doo daa or by hand. heat guns good on low at distance but don’t use that on plastic.
 
i spray, pens are for chips

I would but I have nothing to spray with, even if I did I wouldn't trust me to spray , as my hands shake like a jelly , but mainly it seems overkill, to cover half the vehicle,for a small patch on a door handle. Thanks though :)
I did my lettering with a nail varnish type applicator. If you rub it down and recoat Ito come up smooth eventually. Thinners help to buff it while curing with a doo daa or by hand. heat guns good on low at distance but don’t use that on plastic.
Hmmmm , not a bad idea. Can't do the heat, as it's door handle, and they're plastic. But buffing whilst curing , and a brush that feathers , might work. Thanks :)
 
Drove it again no problems had to use the local ford as all the fecking idiots on bicycles decide to stop there tour de kent country side and stop on the bridge for a selfie. Fecking tossers
 
Back
Top