What did you do with your Range Rover today

gold rover · Jun 5, 2020

RangeRoller dt said:
There are some horror stories of cheap pads and discs they are the ones to watch imported from dumfukistan

Ah well I'm ok. I never put cheap on anything to do with braking. I have had a recurring nightmare, it started even before I learned to drive,where I draw up to a junction , and brakes don't work. There is no rhyme nor reason behind it. However, it means in real life I am absolutely on top of brakes.

gold rover · Jun 5, 2020

I decided to try the handle again, with a different brush. Same bloody problem

Datatek · Jun 5, 2020

RangeRoller dt said:
I like the blue ones
Such a nice selection of shades available on a P38

the blue one I have had for 11 years and is as reliable as a P38 can be expected to be. The green one is the project car awaiting new boots and a problem with the aircon compressor to be sorted, just done the FIP timing and it starts a lot better.

RangeRoller dt · Jun 5, 2020

Static made mine much quieter along with the extra power

gold rover said:
I decided to try the handle again, with a different brush. Same bloody problem
View attachment 211315

Paint is too thick, try thinning it down a little

Tenebreaux · Jun 5, 2020

gold rover said:
I used green stuff on mine for years. Also used redstuff, with slotted/drilled brake discs on my Volvo. Do they make a difference, don't know, but I like the idea that they do

I've never tried them before, pretty much always used Brembo. But HenryB is a fan.

gold rover · Jun 5, 2020

RangeRoller dt said:
Static made mine much quieter along with the extra power

Paint is too thick, try thinning it down a little

Ooooo good thinking.

stuu · Jun 6, 2020

Wet roads she didn't feel 100% today with standing water. Farm track at customers house knock knock rattle rattle.
Way home pulling to the left letting off throttle or braking.
Passenger track rod end is shot.
2 inners and outers ordered.

Grrrrrr · Jun 6, 2020

stustrong said:
Wet roads she didn't feel 100% today with standing water. Farm track at customers house knock knock rattle rattle.
Way home pulling to the left letting off throttle or braking.
Passenger track rod end is shot.
2 inners and outers ordered.

There's always something!

Grrrrrr · Jun 6, 2020

kermit_rr said:
cheers, the ones that screw the plastic vent thats under the wipers that the pollen filter covers screw in to, or do i need to take that off to find screws underneath?

I was thinking of the ones around the screen itself. When I did that foam that disintegrates about a week later I came across a load of screws along the bottom of the windscreen holding the trim in place and they were all rusty as hell. One just lifted out. Been a few years now.

Dopey · Jun 6, 2020

Can someone help me out again, someone told me how to do this, but I can't find the post again, my mouse pointer keeps going off-screen on the right-hand side, how do I put this right?

neilly · Jun 6, 2020

Dopey said:
Can someone help me out again, someone told me how to do this, but I can't find the post again, my mouse pointer keeps going off-screen on the right-hand side, how do I put this right?

Have you extended your screen?

Cheers

Dopey · Jun 6, 2020

No have it the same as before, I had to do windows all over again,

Tenebreaux · Jun 6, 2020

Dopey said:
No have it the same as before, I had to do windows all over again,

Check that your pointing device drivers are up to date.

Dopey · Jun 6, 2020

as far as I know its fine

tomcat59alan · Jun 6, 2020

Dopey said:
Can someone help me out again, someone told me how to do this, but I can't find the post again, my mouse pointer keeps going off-screen on the right-hand side, how do I put this right?

move your screen a bit to the right

Sorry.

Dopey · Jun 6, 2020

tomcat59alan said:
move your screen a bit to the right

Sorry.

You will be when you fall off my screen....

marjon · Jun 6, 2020

Dopey said:
Can someone help me out again, someone told me how to do this, but I can't find the post again, my mouse pointer keeps going off-screen on the right-hand side, how do I put this right?

Has it somehow been set for 2 monitors does it go off the other side if so maybe even multiple screens?

J

Dopey · Jun 6, 2020

No I looked at that already, screen 2 is grey, someone here gave me a simple solution to the problem, and it was an easy fix as well

Mark Piercy · Jun 6, 2020

Dopey said:
No I looked at that already, screen 2 is grey, someone here gave me a simple solution to the problem, and it was an easy fix as well

Did you tilt the screen diagonally over to the left..

Dopey · Jun 6, 2020

Mark Piercy said:
Did you tilt the screen diagonally over to the left..

Good idea, make a wedge for me.....

What did you do with your Range Rover today

Well-Known Member

Well-Known Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Well-Known Member

Well-Known Member

Technician, Bodgit & Scarper Ltd

Technician, Bodgit & Scarper Ltd

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well fumbled member....

Well-Known Member

Similar threads