- Posts
- 34,078
- Location
- North Shropshire
I thought the turbos on the 4.4 were pretty solid.. as far as turbos go
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 12,673
- Location
- Sud ouest France !
You know when you buy some kit for your car that looks great and you get it home and pfff it's pants...
Well I bought these with the latter mentality but daaaaamn am I chuffed to bits.
In no way am affiliated but these are pretty good and damn easy to fit.
There's not à lot of companies that do stuff for these like this. A real find in my book and not permanent, which is excellent.
Well I bought these with the latter mentality but daaaaamn am I chuffed to bits.
In no way am affiliated but these are pretty good and damn easy to fit.
There's not à lot of companies that do stuff for these like this. A real find in my book and not permanent, which is excellent.
- Posts
- 366
- Location
- Maidstone, Kent
I think we had these on our FL. They don't do one for the rear window on account of it rolling down but they were brilliant on the sides, great for kids and so much better than that stupid fabric people pull over the tops of their door.You know when you buy some kit for your car that looks great and you get it home and pfff it's pants...
Well I bought these with the latter mentality but daaaaamn am I chuffed to bits.
In no way am affiliated but these are pretty good and damn easy to fit.
There's not à lot of companies that do stuff for these like this. A real find in my book and not permanent, which is excellent.
Can't remember the make though.
- Posts
- 19,320
- Location
- Buckinghamshire, UK. ('95 DT)
Sodding after-market o-ring on the dip-stick has failed after 3 weeks. Oil all over the drive. Land Rover only sell in packs of 5. FFS.
- Posts
- 366
- Location
- Maidstone, Kent
5 o-rings for a dipstick? That's some set of spares you'll have there!
Have you tried the orange ones? Aren't they the oil/solvent safe ones? Perhaps called Vitron seals or something like that.
Have you tried the orange ones? Aren't they the oil/solvent safe ones? Perhaps called Vitron seals or something like that.
- Posts
- 366
- Location
- Maidstone, Kent
After my boost hose issue last week, I decided to tackle the wheel bearing noise on the OSR of my car this week. It has been making a horrible stressed squeaking at low speed. Then I read a post about the brake shoe pins falling after the backing plate rots out and I thought "Ah yes, that's the noise. I'd better get the screws and washers out and it did happen after one day where the parking brake light was flashing on the dash.
I removed the disc to investigate, then I bought new discs and shoes. I know there's still life in them but I'm a bit picky about my cars so I replaced them anyway, expense be dammed!
New brakes always look nice don't they.
I did one side then took my daughter and her friend to Brownies, decided I could do the other side while they were there and get back. I was correct too but forgot to account for the fact that I'd just driven the car and much to the amusement of my neighbour I removed the disc in record time and then ran across the drive saying "hot, hot, hot, hot!" I didn't want to spill the mess over the blocks and couldn't decide where to drop it!
I removed the disc to investigate, then I bought new discs and shoes. I know there's still life in them but I'm a bit picky about my cars so I replaced them anyway, expense be dammed!
New brakes always look nice don't they.
I did one side then took my daughter and her friend to Brownies, decided I could do the other side while they were there and get back. I was correct too but forgot to account for the fact that I'd just driven the car and much to the amusement of my neighbour I removed the disc in record time and then ran across the drive saying "hot, hot, hot, hot!" I didn't want to spill the mess over the blocks and couldn't decide where to drop it!
brianp38dse
Well-Known Member
- Posts
- 20,108
- Location
- heathrow
looking at them shoes it looks like the previous drove it with the hand brake one they are well and truly cookedAfter my boost hose issue last week, I decided to tackle the wheel bearing noise on the OSR of my car this week. It has been making a horrible stressed squeaking at low speed. Then I read a post about the brake shoe pins falling after the backing plate rots out and I thought "Ah yes, that's the noise. I'd better get the screws and washers out and it did happen after one day where the parking brake light was flashing on the dash.
I removed the disc to investigate, then I bought new discs and shoes. I know there's still life in them but I'm a bit picky about my cars so I replaced them anyway, expense be dammed!
New brakes always look nice don't they.
I did one side then took my daughter and her friend to Brownies, decided I could do the other side while they were there and get back. I was correct too but forgot to account for the fact that I'd just driven the car and much to the amusement of my neighbour I removed the disc in record time and then ran across the drive saying "hot, hot, hot, hot!" I didn't want to spill the mess over the blocks and couldn't decide where to drop it!
Datatek
Well-Known Member
- Posts
- 45,068
- Location
- Near Poitiers SW France
EPB?looking at them shoes it looks like the previous drove it with the hand brake one they are well and truly cooked
brianp38dse
Well-Known Member
- Posts
- 20,108
- Location
- heathrow
Yep the work of the devil himself, what is wrong with a leaver, ow it takes up room that can be used for other unnecessary stuff like the rotary navigation dial
Datatek
Well-Known Member
- Posts
- 45,068
- Location
- Near Poitiers SW France
I agree absolutely. A poor old bloke up the road to me who has just recovered from a broken hip backed his car out of his garage, stopped, the EPB applied itself and that was the end of his drive, it would not release. A similar thing happened to the wife of a friend, she stopped at traffic lights in town, the EPB operated and refused to release leaving her stranded, in both cases the cars had to be recovered to the dealer for the marque.Yep the work of the devil himself, what is wrong with a leaver, ow it takes up room that can be used for other unnecessary stuff like the rotary navigation dial
- Posts
- 34,078
- Location
- North Shropshire
Pretty sure the epb on mine only applies via the lever, nothing automatic about it
Andy Burrell
Retired to the country
- Posts
- 190
- Location
- Cambridgeshire
We have had two sets of these blinds on our Octavia and now our Kodiaq, they are brilliant especially for our dogs who can have the window open and still be screened.You know when you buy some kit for your car that looks great and you get it home and pfff it's pants...
Well I bought these with the latter mentality but daaaaamn am I chuffed to bits.
In no way am affiliated but these are pretty good and damn easy to fit.
There's not à lot of companies that do stuff for these like this. A real find in my book and not permanent, which is excellent.
brianp38dse
Well-Known Member
- Posts
- 20,108
- Location
- heathrow
Vary nice were they a tailor mad set or generic, i remember holidaying in france and noticing a lot of car blinds for sale that you could not get here.You know when you buy some kit for your car that looks great and you get it home and pfff it's pants...
Well I bought these with the latter mentality but daaaaamn am I chuffed to bits.
In no way am affiliated but these are pretty good and damn easy to fit.
There's not à lot of companies that do stuff for these like this. A real find in my book and not permanent, which is excellent.
- Posts
- 12,673
- Location
- Sud ouest France !
They are tailor made yes, I found them by accident on the tinnit! I was actually surprised to find someone that made them
Pare soleil range ro
Carparts-expert.com est une Webshop de produits haute qualité de styling et protection pour votre voiture. Nous déveleppons et fournissons accessoires de voitere haute qualité. À la webshop avec accessoires de styling et protection pour votre voiture c'est très facile à commander.
www.carparts-expert.com
Andy Burrell
Retired to the country
- Posts
- 190
- Location
- Cambridgeshire
In the UK https://www.carshades.co.uk/
Possibly made by the same company?
Possibly made by the same company?
brianp38dse
Well-Known Member
- Posts
- 20,108
- Location
- heathrow
Whose shades are not a bad price for tailor made ones that fit.
- Posts
- 12,673
- Location
- Sud ouest France !
Spot on my good man
rich28uk
Well-Known Member
- Posts
- 635
- Location
- Manchester
Same here, to me nuts and bolts etc are easier to deal with than rot, I don’t mine but of flaking on say tailgate where it’s easy enough to clean and respray but sills, arches etc to much of a pain. Agree about budget, keep thinking add bit here and there and before you know it your original £10k budget is now 30
. I looked at 3.6 and they are cheap but turbos put me off, iv heard of you blank the egrs and map them out it’s meant to be ok but not heard anything for definite. Wouldn’t mind a 4.4 na jag engine, simpler again than the SC but seem very rare so think it will have to be SC next time, right now I’ll keep the td6, not fast but it’s adequate, needs new tyres and rear hub bushes so there here now just waiting on the tool to do them from aMechanic who said he will lend it me. like I say if blanking the egrs off would prevent turbo failure then I’d also consider 3.6.
- Posts
- 19,320
- Location
- Buckinghamshire, UK. ('95 DT)
I've just gone original. £9 for 5 but at least it should fit and last. Regretting ever touching it now. Just got back from the Stealers and having a cuppa vefore starting on it.
- Posts
- 19,320
- Location
- Buckinghamshire, UK. ('95 DT)
I suspect yours has little plastic gears that unless dissassembled, cleaned and regreased every 2 years will pick the most inopportune moment to seize solid and leave in front of a tailback with egg on your face.
