West Yorkshire Laning Trips
- Thread starter suew
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
they say the snow is comming
Nij48
New Member
- Posts
- 192
- Location
- East of the Pennines
How I would love to do the Wales trip
I might just meet you at the meeting point and say hi...unfortunately that's the furthest I will be going
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
How I would love to do the Wales trip
ya dont know wot ya missing wales is one fab place to go laning
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
oohhhhhhhSorry Sue, can't make it on Saturday.
Good to catch up last night though! Neil's oil burner is ace.... and by oil burner I don't mean a Landy!
aaahhh
still needs a bit of refining tho
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
yeah.
And as for the plans for the special oil collection system so some of it actually gets into the burner instead of the floor
don't let you near a sump plug.
........reckon that could be a good nickname for yerz.......
yeah.
don't let you near a sump plug.
........reckon that could be a good nickname for yerz.......
Nope, that wont do at all.
Nasty mucky stuff, revolting job that is. Did Diff spill any last night
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
old stuff, no.Nope, that wont do at all.
Nasty mucky stuff, revolting job that is. Did Diff spill any last night
new stuff?
ask him about his sump plug
old stuff, no.
new stuff?
ask him about his sump plug
Dont need to, I know what your like.
You hid it and then told him he had dropped it in the bucket of smelly old oil. You only get away with that once
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
no, no. had nowt to do with it.
twas all his doing.
twas all his doing.
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
sayin nowtOK, second attempt, he forgot to put the sump plug back in so all the new oil came out as well
Which means there will now be a "Diffs Slick" on the workshop floor
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,106
- Location
- Gloucestercotshirewolds
OK, second attempt, he forgot to put the sump plug back in so all the new oil came out as well
Which means there will now be a "Diffs Slick" on the workshop floor
Only a complete muppet could do such an eejit thing....
Believe me..........I know
:doh:sayin nowt
:hysterically_laughi
Almost as good as my 5 slicks and standing under the diff when I was pumping oil into it
Only a complete muppet could do such an eejit thing....
Believe me..........I know
No you're safe. This complete muppet didn't manage to make that mistake
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
Dont need to, I know what your like.
You hid it and then told him he had dropped it in the bucket of smelly old oil. You only get away with that once
ound: he never, did he?
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
eejit I might be ... complete muppet? No only partial.
See, I still had the old oil collection tool (cut apart old container) still under the sump. All I did was begin to pour the new oil in, but shortly after beginning the process...****, **** ****... Neil thought I'd got cramp or summat with the shouting! I jumped off the ramp and dived under the Disco to put the plug in. Then thought sod it. finish making the brew and let the little bit of new oil flush the sump again
If there hadn't of been the trouble with the centrifugal oil filter cover bolt stripping the housing then I might have remembered about the plug. (Ta for the bit of engineering on the lathe Neil!)
Job done, even if it was a little late in the evening/morning...:scratching_chin:
EDIT Hope the exploratory laning went well!! Sarah, have you used that NATO hitch yet?
See, I still had the old oil collection tool (cut apart old container) still under the sump. All I did was begin to pour the new oil in, but shortly after beginning the process...****, **** ****... Neil thought I'd got cramp or summat with the shouting!
I jumped off the ramp and dived under the Disco to put the plug in. Then thought sod it. finish making the brew and let the little bit of new oil flush the sump again If there hadn't of been the trouble with the centrifugal oil filter cover bolt stripping the housing then I might have remembered about the plug. (Ta for the bit of engineering on the lathe Neil!)
Job done, even if it was a little late in the evening/morning...:scratching_chin:
EDIT Hope the exploratory laning went well!! Sarah, have you used that NATO hitch yet?
Nij48
New Member
- Posts
- 192
- Location
- East of the Pennines
Laning was great.
Thanks to zip and sue.
Now I need a mirror, steering box and a decant excuse to tell the mrs about the latest scratch on the car lol
Thanks to zip and sue.
Now I need a mirror, steering box and a decant excuse to tell the mrs about the latest scratch on the car lol
Last edited:
Similar threads
