P38A Viscous coupling

jamesmartin said:

its straight forward just unbolt housing and remove if you havent an impact gun slacken flange nut first vc come off with the housing which after flange is removed can quite easily be tapped out with a copper hammer etc you need to jack up the transmission and remove mount iirc

Click to expand...

mutsnutz said:

james is it a special nut on flange

Click to expand...

jamesmartin said:

no its a 30mm socket sized nylock you can reuse it as long as it looks ok which it will as its protected from the elements when props bolted on, theres a rubber sealing washer behind the washer it can be reused or use some silicone sealant to seal the splines

Click to expand...

Mark Piercy said:

I dropped the g/box cross member, it made a big difference. You will need to support your box though as it has the box mounts on it. You can refill with new oil aswell.

Click to expand...

mutsnutz said:

Thanks Mark

Click to expand...