stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Cheers Rusty. Mine has the very first dash like that and only had half them lights on. Will put a pic up.
Tinkering with my Vogue
- Thread starter stutab
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Anybody able to give me a hand on Saturday late morning early afternoon ish, we are emptying the barn, including the combine and the only thing left is the Rangy so needs to be out Sunday.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
temp sender was used on american spec models ,switch often fitted but not used ,many vehicles have the wiring taped up for it
KillaJoules
Active Member
- Posts
- 950
- Location
- West Herts
I'll have to check with the wife, is it just all your bits to shift Stu?
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Ye, want to put the doors and boot back on, place the floor in, put a steering column in the fill it with the other stuff. Might put the windscreen in as it will be outside under a tarp.
How come your 80 is on the drive? You going to work in it?
KillaJoules
Active Member
- Posts
- 950
- Location
- West Herts
Yeah stu. Been commuting in it 
Sadly I have to take the 110 tomorrow as it is off for a service.
Should be free for a few hours in the morning. April is fine with it. Dom says he may be able to help in the morning too.
Sadly I have to take the 110 tomorrow as it is off for a service.
Should be free for a few hours in the morning. April is fine with it. Dom says he may be able to help in the morning too.
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Sounds good to me. Will be intouch.
KillaJoules
Active Member
- Posts
- 950
- Location
- West Herts
Helped Stu out today
We got the doors a tailgate bolted on then we spent a couple of hours trying to fit the widscreen, but
A) the seal was too big
B) The bugger would not go in
Then we loaded it up with all the bits and used the loader to hoik it out of the barn
We got the doors a tailgate bolted on then we spent a couple of hours trying to fit the widscreen, but
A) the seal was too big
B) The bugger would not go in
Then we loaded it up with all the bits and used the loader to hoik it out of the barn
Last edited:
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Ye, tried that, the seal is about an inch to big on all sides so won't go in (windscreen fits inside the seal when on the floor) so it's going back after a ****ed off phone call.
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Cheere Joules, your help was much appreciated. The pics look great.
I am going up tomorrow to finish emptying the shed and put some plastic over it all. Will put some pics up but I am afraid to say to you all
THAT'S IT TILL OCTOBER
Harvest starts very soon so onto 100hour weeks to get the main ingredients in everyone's bread and beer and a few thousand litres of cooking oil cut and into the lorries. Then cultivate and plant it all so we can do it all over again next year. Only 1000acres to do. Will put some pics up but till then I will see you in the autumn
I am going up tomorrow to finish emptying the shed and put some plastic over it all. Will put some pics up but I am afraid to say to you all
THAT'S IT TILL OCTOBER
Harvest starts very soon so onto 100hour weeks to get the main ingredients in everyone's bread and beer and a few thousand litres of cooking oil cut and into the lorries. Then cultivate and plant it all so we can do it all over again next year. Only 1000acres to do. Will put some pics up but till then I will see you in the autumn
Datatek
Well-Known Member
- Posts
- 44,264
- Location
- Near Poitiers SW France
Cheere Joules, your help was much appreciated. The pics look great.
I am going up tomorrow to finish emptying the shed and put some plastic over it all. Will put some pics up but I am afraid to say to you all
THAT'S IT TILL OCTOBER
Harvest starts very soon so onto 100hour weeks to get the main ingredients in everyone's bread and beer and a few thousand litres of cooking oil cut and into the lorries. Then cultivate and plant it all so we can do it all over again next year. Only 1000acres to do. Will put some pics up but till then I will see you in the autumn
Good luck with the weather for the harvest, they are on to 24 hour working days over here at the moment, with the spell of very hot weather too much is ready at the same time
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Well I promised a pic and hear it is
Harvest still 10 days away but doing a lot of roof and building repairs, and washing everything down with the pressure hose.
Harvest still 10 days away but doing a lot of roof and building repairs, and washing everything down with the pressure hose.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Looks like you got a leak
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Will use a tube of silicon and new seals, hopefully that will work
Similar threads
