TD5 90 Project

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thanks to Paul at landrover connectors he got me the throttle pot connector and the ecu pins out for next del del.
Connected a trailer light wire (7 core) to the throttle pot, then crimped ecu pins to the other end,
Removed the orginal wires for ECU plug and bobs yer mums live in lover.
Just used long nose pliers to crimp on the ECU females, not too bad if you used to it lol, cos i cant find my econosel crimp die etc
(7 wires at the throttle only 5 at the ecu, 2 are doubled up at throttle end.) Did not spot that when i ordered the 7 core cable, could have used 5.
Pics might be useful to someone.
Screenshot 2022-10-05 at 16.06.15.jpg
Screenshot 2022-10-05 at 16.08.42.jpg
Screenshot 2022-10-08 at 16.24.42.jpg
 
Last edited:
VDO Rev counter / taco install, very simple.
Single signal wire from ECU, my black connector had a blanking grommet at pin 19, so even easier to do.
Used gold plated econoseal connector, and used purple oversized wire fed through same flexi conduit i used for the throttle to ecu bypass, then staight up into binnacle.
45mins job done, worst part is fighting the rubber flooring stuff that keeps wapping you in the face!

IMG_5263.JPG

IMG_5269.JPG
IMG_5268.JPG
IMG_5274.JPG
 
Last edited:
Up Next

Lof Powerspec SMF / HD Clutch kit ( fork release bearing etc)
Pioneer braided HD clutch lines
LR Clutch master and slave.
So will have all new hydraulic lines brakes and clutch, shorted!
Screenshot 2022-10-26 at 13.44.21.jpg
Screenshot 2022-10-26 at 13.44.37.jpg
 
New Year

  • OME shocks
  • OME Springs
  • Central locking kit fit
  • NAS rear step
  • Raptor Coated Roof
  • Alive tune
  • Mid Cross member conversion
  • Seats
 
KISSMYAURA said:
VDO Rev counter / taco install, very simple.
Single signal wire from ECU, my black connector had a blanking grommet at pin 19, so even easier to do.
Used gold plated econoseal connector, and used purple oversized wire fed through same flexi conduit i used for the throttle to ecu bypass, then staight up into binnacle.
45mins job done, worst part is fighting the rubber flooring stuff that keeps wapping you in the face!
View attachment 276855
View attachment 276849View attachment 276850View attachment 276851
Click to expand...
 
Last edited:
LOF Powerspec Clutch / Transfer Box new seals etc
I really wanted to do this myself, i have done everything else, and the only time anyone else touches it, its for an MOT inspection.
But alas i just don't have the lift yet, and my 3 slipped discs have conspired to say a resounding no way to axle stands and a engine hoist, so I am no longer in denial and have to accept it.
ho hum, ....

Huge thanks to Sam from Juice, cant recommend them enough.


IMG-20230118-WA0011.jpg

IMG-20230118-WA0009.jpg
IMG-20230118-WA0008.jpg
IMG-20230118-WA0010.jpg
 
Last edited:
You must log in or register to reply here.

Similar threads

M
My 1989 90 V8 County
Replies
6
Views
2K
MattYorke
M
R
Defender 90 1998 R Reg 300tdi hardtop for sale
Replies
7
Views
3K
Rob308win
R
ivancrx
Defender 90 1990 Defender 90 200tdi Pick Up NOW SOLD
Replies
11
Views
3K
ivancrx
ivancrx
Paul Leinichen
Disco 2 TD5 ongoing project
Replies
4
Views
3K
Paul Leinichen
Paul Leinichen
Steve Noakes
My 110 1995 300tdi
2
Replies
28
Views
6K
Joss155
Joss155
Back
Top