KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
KNORD FOOLISH-CONE PIPES....
TD5 90 Project
- Thread starter KISSMYAURA
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Steering guard mod, to accomodate GL HD sumo steering bars and Disco drop arm conversion.
Buzzworld bedliner rattle can...
Buzzworld bedliner rattle can...
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
final coat and refit...
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
tow electrics / reversing cam next...
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
So its time to renew / paint the passenger door, i did the drivers door a few years ago, was happy with the result.
Old one will be up for sale, soon just needs new steel lower frame bar as its rotten out, skin is tip top.
Old one will be up for sale, soon just needs new steel lower frame bar as its rotten out, skin is tip top.
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
POWERFLEX Poly Hybrid Exhaust Hangers, usual rubber ones dont seem to last very long, so these are muchos betterer!
They are not rock hard like a poly bush.
They are not rock hard like a poly bush.
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
OME new rear shocks ordered today...
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
My Henry has something similar but it’s welded to the chassis
Came like that unfortunately and is likely holding it together
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Just popped the poly bushes in and gave the rings a dust of yellow enamel spray.
bankz5152
Well-Known Member
- Posts
- 9,329
- Location
- South London/North Kent
Lookinggood!
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Just finished applying the heatshrink, genius idea from Gwyn, very happy with result (i used my Rothenbuger Mapp torch, more accurate than heat gun which takes all day, shock did not get hotter than it would in sunshine so all good.
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Done and done, you know when yer gettting old when you need two hands and a half way grunt n rest to compress a new damper, at least dogs were pleased to see me under the truck they climb under and have a chill when im working.
Terrafookwits ones were welded to the pin, had to relief cut with grinder the inner metal sleeve they pulled off leaving the rubber top bushes behind, considering they had shrunk to a third of the size of the eye it was not difficult..
Road tested this morn, very happy muchos betterer. ordering the fronts n hd turrets next.
Terrafookwits ones were welded to the pin, had to relief cut with grinder the inner metal sleeve they pulled off leaving the rubber top bushes behind, considering they had shrunk to a third of the size of the eye it was not difficult..
Road tested this morn, very happy muchos betterer. ordering the fronts n hd turrets next.
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Dash/ reverse cam both 1920 x 1080P HD
Has tesla mode when parked so records front n rear, will be hard wired in, too hot today.
Night vision is superb, has audio as well, but considering my patient and very polite venacular when confronted with a dickhead motorist, i felt best to turn it off.
You can have the fwd cam on the screen, i will however have it on perm reverse view.
As you will know the defender rear view mirror just shows you the inside of your truck the a reflection of the front fooking about as much use as putin in a peacetalk.
If i select reverse the parking-cnut lines appear on the screen, again i dont think ill bother wiring that bit up either
Has tesla mode when parked so records front n rear, will be hard wired in, too hot today.
Night vision is superb, has audio as well, but considering my patient and very polite venacular when confronted with a dickhead motorist, i felt best to turn it off.
You can have the fwd cam on the screen, i will however have it on perm reverse view.
As you will know the defender rear view mirror just shows you the inside of your truck the a reflection of the front fooking about as much use as putin in a peacetalk.
If i select reverse the parking-cnut lines appear on the screen, again i dont think ill bother wiring that bit up either
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
New shoes.....hate the white writing, its coming straight off....well flip n reverse when i get a moment.
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Yep anti corrosion!
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Tyres flipped, no more shouty white lettering......Its not a fooking jeep.
Much betterer...
Much betterer...
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Another delivery from the Welsh Valley's so thats my weekend mapped out then!
Upol Acid 8 Etch Primer then going with PAL116 Sunburst / Sunflower yellow same as OME shocks will hardley be seen etc.
But as I have said many times is damp as fook up here, makes Mordor and Dagobah look like a desert and it makes me feel betterer
Upol Acid 8 Etch Primer then going with PAL116 Sunburst / Sunflower yellow same as OME shocks will hardley be seen etc.
But as I have said many times is damp as fook up here, makes Mordor and Dagobah look like a desert and it makes me feel betterer
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
OME nuff said...
