Series 2a Wiring

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
border

border

Well-Known Member
Posts
3,517
Location
North East. UK
Really need to get the wiring finished on my rebuild.

Using the harness from a ex MOD Ambulance, so there will be a few wires that I dont need. Got some wires identified with help from a friend , got a pretty good idea of what goes to what in engine bay and rear of chassis but struggling with how to wire the dash gauges up. The wires on the left in pic are for heater and wiper motors so they are straight forward its the rest I need help with like Ignition, fuse box, solenoid lights ect.
 

Attachments

  • 20220712_180819.jpg
    20220712_180819.jpg
    244 KB · Views: 249
border said:
Really need to get the wiring finished on my rebuild.

Using the harness from a ex MOD Ambulance, so there will be a few wires that I dont need. Got some wires identified with help from a friend , got a pretty good idea of what goes to what in engine bay and rear of chassis but struggling with how to wire the dash gauges up. The wires on the left in pic are for heater and wiper motors so they are straight forward its the rest I need help with like Ignition, fuse box, solenoid lights ect.
Click to expand...
Just be glad its.not a series 3, the wires behind s3 gauges look like a jungle.

Col
 
Pic of Gauges and Wires that lead to it.
Got the Ignition barrel to fit to dash and need a new switch for lights.
I know the wires on left of pic go to wiper and heater motors.
Can anyone point me in the right direction to which wire goes where from pics so I can get started on this ?
 

Attachments

  • 20220717_202002.jpg
    20220717_202002.jpg
    446.1 KB · Views: 235
  • 20220717_202021.jpg
    20220717_202021.jpg
    384.5 KB · Views: 192
  • 20220717_202110.jpg
    20220717_202110.jpg
    239.9 KB · Views: 224
You'd be wise to ignore colours, they're likely to have been changed at some point in the last 50 years. It won't be hard to trace the wires back to their corresponding plug or component.
 
The original switch in centre of dash switch had aux, ignition whilst the knob switched the light on ,side lights and head lights ,the dip /main headlights switch was a floor mounted button switch and indicators where added later
via a rotary switch mounted on extra panel next to original panel .you can use your ignition switch but you would need a lighting switch for side and head light
PIC_0147 - Copy.JPG
 
if you do use the ignition switch depending on what starter motor is fitted ( pre-engaged have solenoid fitted on starter motor)you will require a starter solenoid to replace the starter switch wired to the ignition switch (the switch is not designed to take the high current on starting )
 
mystery said:
if you do use the ignition switch depending on what starter motor is fitted ( pre-engaged have solenoid fitted on starter motor)you will require a starter solenoid to replace the starter switch wired to the ignition switch (the switch is not designed to take the high current on starting )
Click to expand...
Thanks I have Solenoid in engine bay will take pics of it and starter.
 
You must log in or register to reply here.

Similar threads

N
Series 2a 69/70 wiring mess
Replies
7
Views
547
grewth
G
V
TDCI 2007 What is this for?
Replies
0
Views
212
vtwin
V
S
voltage stabiliser
Replies
1
Views
366
Tall Ratbag
T
StuRox
Disco 1 Interior Light door switch wiring
Replies
8
Views
352
StuRox
StuRox
Y
Another series III brake fail wiring harness question.
Replies
7
Views
634
steve2286w
steve2286w
Back
Top