Like them too.You want dials and switches in my day we had glowing and steam noises............
Like them too.You want dials and switches in my day we had glowing and steam noises............
Saw a Velar in the supermarket car park, the rear end is as UAF IMO.What's the consensus on the Velar then?
I wondered that too, but if that's just required for the stop/start we'll leave it
Firstly we had no idea this was the case until now, secondly we've had it done by an Indy and all seems fine (barring the stop/start)
It’s not pretty. I hate that they have one control dial and you have to assign it each time to what function you want such as temperature, fan level etc.Saw a Velar in the supermarket car park, the rear end is as UAF IMO.
For me personally, I want a car not a mobile XBox, I want switches that can be operated without have to take my eyes off the road. In addition the excess electronics in cars is unreliable and often unrepairableIt’s not pretty. I hate that they have one control dial and you have to assign it each time to what function you want such as temperature, fan level etc.
WeirdoI want switches that can be operated without have to take my eyes off the road.
What's the consensus on the Velar then?
I wondered that too, but if that's just required for the stop/start we'll leave it
Firstly we had no idea this was the case until now, secondly we've had it done by an Indy and all seems fine (barring the stop/start)
Plastic fantas.....errrr...nahI think the fact that there isn't much chatter about the Velar, amongst enthusiasts, says it all
Well the new battery is fitted, warning has gone but auto stop/start isn't working. Now that's a good thing in my book but my wife's on the way back to the garage as they want to check everything over.
For me personally, I want a car not a mobile XBox, I want switches that can be operated without have to take my eyes off the road. In addition the excess electronics in cars is unreliable and often unrepairable
Thanks, not sure what the CCF setting is so will look into that. I don't think they reset anything, but they plugged the computer in and checked pages and pages of info and said everything was showing as working as normal.hiya
great u got it sorted out, alas don’t forget in the CCF setting the stop start can be turned on / off
asume they reset the BMS module after the new battery was fitted , they might need to go into the CCF settings to change the stop start as normally when the battery leads are removed it can shut down certain systems to protect itself , then once any errors etc have been cleared it can be mainly told to turn back on
However personally would also keep it turned off, lol , same with the keyless entry would disable that as well
What's the consensus on the Velar then?
My FL2 (basically an older design of Evoque) does suffer from a sluggish starter after a couple of weeks of local driving over the winter.Cool thanks, I thought it sounded a bit odd. Yes it tells you about jump starting, and about connecting the black clip to the earth point for which the diagram is typically clear as mud (although I'm sure will be obvious when I open the bonnet )
I do think the battery is shot though the fact it's not charged after 1h 40 mins of driving, however I will buy a smart charger for keeping it maintained in the future.
All but the most basic of modern cars use some form of smart charging.I believe many manufactures do it, not just JLR.
J
It's a Jaguar F type, but not so good looking.What's the consensus on the Velar then?
All but the most basic of modern cars use some form of smart charging.
Unfortunately a smart charge system needs to be told that a new battery has been fitted, otherwise it can overcharge, or undercharge.
It's not difficult to recalibrate the battery management system, with the right equipment.
Is this something I need to be concerned about? The garage I went to checked everything over with their computer but said there was no need to reset anything. Is there anyway I can check myself that the system has registered a new battery?All but the most basic of modern cars use some form of smart charging.
Unfortunately a smart charge system needs to be told that a new battery has been fitted, otherwise it can overcharge, or undercharge.
It's not difficult to recalibrate the battery management system, with the right equipment.
Unfortunately you can only set such things with dealer level diagnostic equipment.Is this something I need to be concerned about? The garage I went to checked everything over with their computer but said there was no need to reset anything. Is there anyway I can check myself that the system has registered a new battery?
Thanks for the info. As long as the worst thing that can happen is it’ll lose charge again that’s fine, don’t want it to cause any serious issue.Unfortunately you can only set such things with dealer level diagnostic equipment.
However there is also a degree of intelligence in these smart charge systems, which often calibrate themselves over a period of time, exactly the same way the engine and gearbox ECMs do.
If your indi has checked the charge rate, and says it's all good.
I'd use it for a bit and see what happens. You never know, it could well be fine.
Let's hope it doesn't go bang thenthe worst that can happen if you change the battery and dont tell the car when you're supposed to, you could overcharge the battery
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!