pistons
- Thread starter gil
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I have noticed that a lot of threads just sort of die out.
That's a pity, because we don't learn as much as we should.
CharlesY
davek0974
Well-Known Member
- Posts
- 4,848
- Location
- Bishops Stortford, Herts.
Bugger, just read all of this thread, no happy ending 
Must remebe to read the last page first next time.
Must remebe to read the last page first next time.
gil
Active Member
- Posts
- 595
- Location
- Basingstoke
Right, finaly got round to change the piston. Mesured up for the new head gasket and put it all back together. Starts up straight away (good old 300), but it seems alot rougher than it used to. Can you just put my mind at ease, im thinking it because the engine has been apart and it needs time to settle and the new piston to bed in. Is this right?
Remind us ... was it just a PISTON problem?
Did you make sure that pistons 1 and 2 rise and fall EXACTLY together, and the same with pistons 2 and 3 ?
If it's running a bit rough, I don't think the new piston can be held to blame.
Check for things that are LOOSE, like pulleys, belts, dodgy engine mountings, exhaust pipe not clamped properly. That sort of thing.
I think it is very UN-likely there's a problem in the moving parts inside the engine (crankshaft, conrods, pistons), because it fires up well.
It isn't running all smoky is it?
Last edited:
- Posts
- 83,282
- Location
- Embasinga stocæ
gil
Active Member
- Posts
- 595
- Location
- Basingstoke
Yeh con rod thrown. All the pistons are fine. It only ran smoky when i first fired it up, its fine now but i will put that down as taces of oil in the bore.
Re: pistons Quote:
Originally Posted by CharlesY
Did you make sure that pistons 1 and 2 rise and fall EXACTLY together, and the same with pistons 2 and 3 ?
yup - that wud make it run rough, CharlesY
Ahhh yes, well of course I was assuming he had also twisted his crankshaft a bit ...
But for untwisted crankshafts it should be ...
"Did you make sure that pistons 1 and 4 rise and fall EXACTLY together, and the same with pistons 2 and 3 ?
Let's not get involved with the need also to twist the camshaft - OK?
Rough Running diesel engines can be a nuisance to fix without being there to see and hear what the thing is doing.
Originally Posted by CharlesY
Did you make sure that pistons 1 and 2 rise and fall EXACTLY together, and the same with pistons 2 and 3 ?
yup - that wud make it run rough, CharlesY
Ahhh yes, well of course I was assuming he had also twisted his crankshaft a bit ...
But for untwisted crankshafts it should be ...
"Did you make sure that pistons 1 and 4 rise and fall EXACTLY together, and the same with pistons 2 and 3 ?
Let's not get involved with the need also to twist the camshaft - OK?
Rough Running diesel engines can be a nuisance to fix without being there to see and hear what the thing is doing.
gil
Active Member
- Posts
- 595
- Location
- Basingstoke
yeh i can understand. might try and get REME to have a look. and for some reason the fookin spedo doesnt want to work now! fix one thing another breaks lol. Will post the outcome
