Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
I do not know for sure but I think all the distributed front sensors are the same.
P38 crash sensor question
- Thread starter magh
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
Ok am thinking about buying a nanacom which one do o U recommend
- Posts
- 12,628
- Location
- Sud ouest France !
There's only one model I think but you will need the correct unlock code for your model 38'. Diesel or petrol and the lead to go with it as there are a couple. 
- Posts
- 3,878
- Location
- Near Heathrow.
Nanocom Evolution with Green Cable for all models of P38. Licenses are specific for EDC, GEMS or Motronic. Price depends on whether you're inside EU or VAT free !! https://www.nanocom-diagnostics.com/shop/browse
There's also some used on eBay, but licenses vary, and you will need to contact Blackbox and get a used one registered to you.
There's also some used on eBay, but licenses vary, and you will need to contact Blackbox and get a used one registered to you.
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
Had nanacom on
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
Had nanacom on my p38 today and would not talk to ECU for airbags.!!
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
Anybody
Am needing 2 crash sensors
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Are you selecting the correct ECU version? Early and late SRS ECU's are totally different.
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
Yes I know that as I have 2 p38s one has crash sensors and one has none.
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
I changed the ECU not new.
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
Can U still get new ECU s for the p38 and crash sensors
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
The crash sensors are still there just integrated in the ECU on the newer version.
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
I doubt the early version is available still new, the late version might be but that's unlikely. I may have an early version you can have for the cost of postage, I'll look tomorrow.
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
Had the nanacom check out the fault it's not talking to the ECU don't know how
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
I wonder if it's a break in the wiring
- Posts
- 12,628
- Location
- Sud ouest France !
You could do with finding the ecu and see if your getting power to it with the ignition on. All the fuses OK?
- Posts
- 12,628
- Location
- Sud ouest France !
Also check the obd plug for corrosion 
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Sorry, my early SRS ECU has gone.
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
Changed the ECU 2nd hand but said it was ok
Doolinjames
Active Member
- Posts
- 137
- Location
- denny
Plug for obd ok
