JATE rings - rear attachment

steve bain · Mar 31, 2010

your gonna grill me for this!!

just fitted my steering guard with recovery points so thought i'd stick the jate rings on the back. but theres no hole!! seriously! where abouts are they meant to be? all i can think is part of the chassis has been replaced or summit!

any pics? all i can find is ones of the front.

its on a d reg 90.

steve

wiltshire landyman · Mar 31, 2010

you take out your existing tow points and your jate ring goes there

sypher · Mar 31, 2010

wiltshire landyman said:
you take out your existing tow points and your jate ring goes there

Them tie down hoops at the swan neck of the chassis

MrJC · Mar 31, 2010

Fook me.... I have been looking for mine for 12 months. So glad Steve asked that stupid question!

Will dig me jate rings out

steve bain · Mar 31, 2010

i don't have any existing tow points!! is it the same place as the 'spreader bars' for the tow bar are located? if so i need the tow bar, anyone wanna buy jate rings?!

lr110 · Mar 31, 2010

look under your landy and you will see tie down points they go there
if i have pics i will paste

lr110 · Mar 31, 2010

let me look hang on

lr110 · Mar 31, 2010

yes its the same place as the spreader bar

thainy · Mar 31, 2010

i have a pic but dont know how to put the pic on here

steve bain · Mar 31, 2010

bugger!! need the tow bar. ho hum. anyone wanna buy a cheap cast jate ring?

same as this one, £12 posted

Land Rover Forged Recovery Jate Ring Kit Offroad 4x4 on eBay (end time 09-Apr-10 15:21:06 BST)

lr110 · Mar 31, 2010

can you make them fit as well?

steve bain · Mar 31, 2010

right, just been to look. there are no holes and spreader is on a bracket, not through the chassis rail. hopefully makes sense. my new guard too. yay!
any more ideas?

lr110 · Mar 31, 2010

steve is that a 90 as it dont look like mine, i have 2 110s one is civvy with a towbar with holes on a load spreader the other is a ex-mod with jate rings, on my profile pics you will see it getting pulled on the rear jate rings, sorry no other fots

steve bain · Mar 31, 2010

yep deffo a 90, not a defender though so maybe that makes a difference. how strange!!

BuzzLand · Apr 1, 2010

Tie down loops?
Are they the two ring bits under the front of the vehicle?

Damn. That is an interesting dilemma!

goonarmy · Apr 1, 2010

BuzzLand said:
Tie down loops?
Are they the two ring bits under the front of the vehicle?

Damn. That is an interesting dilemma!

here Google Image Result for http://www.bigsky-adventures.com/landy/jate-rings/jate-rings-00-sm.jpg

goonarmy · Apr 1, 2010

steve bain said:
right, just been to look. there are no holes and spreader is on a bracket, not through the chassis rail. hopefully makes sense. my new guard too. yay!
any more ideas?

Why dont you use the tow bar? Try here for more points Indispensable Recovery Gear !
The jate rings might go through where the psreader attaches to the chasis

goonarmy · Apr 1, 2010

How to mount a set of jate rings on a RRC? - Land Rovers Only - Land Rover Forum
quite interesting points on here

steve bain · Apr 1, 2010

its mainly because i have them lying around now so thought i'd put them on to give me more options, but looks like i'll have to stick with the tow ball!!

sypher · Apr 1, 2010

It looks like your landy's been welded in the area and they coverd over the holes ....

JATE rings - rear attachment

New Member

I’m back

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

New Member

Well-Known Member

New Member

Well-Known Member

New Member

Active Member

Beer tester

Beer tester

Beer tester

New Member

Well-Known Member

Similar threads