Is it worth putting induction kit on 4.6 v8

sam-mubarak · Dec 12, 2010

Its got full service history, and was serviced last in october, so that should all be fine, its also got magnacore leads, as when i got it one of the leads was shorting on the bulkhead, and as said earlier its got a full rpi exhaust and straight pipes. Would it be worth putting it on a rolling road session, can anything be tweaked/adjusted like fuel pressure/ratios etc. on these engines while on there? Thanks, Sam

juiceyv8 · Dec 12, 2010

it still weighs the same as a block of flats.....google "power to weight ratio"

for an explanation.

sam-mubarak · Dec 12, 2010

I know what power to weight ratio is and understand it will never be fast, but nothing wrong with a bit of extra power or torque, Sam

juiceyv8 · Dec 12, 2010

sam-mubarak said:
I know what power to weight ratio is and understand it will never be fast, but nothing wrong with a bit of extra power or torque, Sam

If you want more power get a american v8. (cast iron block) and stronger.

video your v8 so the V8 boys can hear it

wammers · Dec 12, 2010

sam-mubarak said:
I know what power to weight ratio is and understand it will never be fast, but nothing wrong with a bit of extra power or torque, Sam

Go get yourself a 4.7 litre Porsche engine from a 928s and stick that in if you want to play.

Is it worth putting induction kit on 4.6 v8

sam-mubarak

New Member

juiceyv8

New Member

sam-mubarak

New Member

juiceyv8

New Member

wammers

No longer with us, RIP

Similar threads