Stone56
Well-Known Member
- Posts
- 3,212
- Location
- Up a mountain
Then thay should be earthed should thay notOur uk washing mahines, dryers, frides and freezers are metal on the oot side.
Then thay should be earthed should thay notOur uk washing mahines, dryers, frides and freezers are metal on the oot side.
My dad always started his Bedford dormobile with the starting handle don't think it had a battery if it did it was USI used to start my Morris Oxford with a starting handle, this was in the nineties, it confused the yung uns because I only had to tug upwards on the handle and she would start
Wipe the rubbers with WD cleans and softens them
You soon learn the correct way with a dumper trust me I know even worse on a frosty morningMe gran showed me how to start her Austin A35 with the starting handle. And where to not put my thumb to avoid getting it broken.
How to find out if the electric cattle fence is on pee on it…wet your fingers, hold both ends, measure distance you jump from floor.
Disclaimer to anyone: DO NOT actually do this
I'm going to wire 6 up and try it, can always wire them in sixes if they go dim with numbersAre you ok with the concept of connecting things up in series and/or in parallel?
I just noticed @Hippo mentioned wiring them up in parallel and don't want to be patronising but you never know!
This is a great thread which explains the benefits and disadvantages of wiring in series, or parallel or series/parallel.
Wiring LEDs Correctly: Series & Parallel Circuits Explained
Don't let electrical circuits and wiring LED components sound daunting or confusing - follow this post for an easy to understand guide!www.ledsupply.com
You'll be getting used to the symbol for a diode by now! The funny arrow type thing which shows that the current can only flow one way through one.
10 lamps would prolly be too much for a single series circuit anyway.
Yes they is. Thas why we earth our sockets. There is another method of finking. Dun't earth anyfink. Then yer can't gerra shock live to earth. Hence why some countries dun't have earths.Then thay should be earthed should thay not
To give them all 12v oft yer power yer need to wire them in parallel. All LED positive connect together. All LED negative (0v), connected together. Yer can do it by daisy chaining them. If yer put 6 in series then each obe will get a 6th of the 12 volts. So they will be dim.I'm going to wire 6 up and try it, can always wire them in sixes if they go dim with numbers
See the gp, lay it on really thick and get on to allopurinol. You must be gout-free for a month before you start. Until then, paracetamol & codeine with ibuprofen will take the edge off it. My problem is that I can’t use ibuprofen tablets because I’m on chemotherapy and the combo isn’t good.
My brother has been on allopurinol for a decade and it has made life very much easier for him.
Get 'er indoors to make your curries with those ingredients in.A mate of mine is an extremely fit 67YO labourer and he swears by Turmeric & Ginger tablets to prevent joint pain and the like.
It was taking so long for the cold water to empty from the pipes that I had some lunch.
But went back in, messed about cleaning things up and re-orientated the cold pipe. It is now straight on and perpendicular to where the back of the unit will be.
So then I went off to isolate the hot water.
Can I do it? Can I flip!
Now it isn't as if I haven't done it before. Right in front of me are the fittings on the hot tap pipe that only I could have put on. I also did the hot tap in the kitchen and the downstairs loo basin and cistern which are also fed from the header tank. (A pro did the two bathrooms.)
There are various gate valves in the airing cupboard which contains the HW tank and sits directly under the header tank in the loft.
I would have sworn on a stack of bibles that it was one of two of the gate valves in there which are not linked to the central heating or power-shower pump.
I know for a fact that I have never been forced to block the outlet(s) from the header tank.
The gate valves are a pig to turn off, especially one which is right at the back above and behind the shelf W uses for sheets etc, and can only just be reached with me standing on a set of steps, while swearing profusely. But I have turned these off and this time waited for ages for the taps to run dry.
Nothing doing.
Checked in the loft in, under and around the header tank, not a valve in sight except the ball valve for the tank itself, and the one for the little tank for the central heating, which are obvs fed from the cold water supply. All this with the mains isolated just in case you were thinking the tank might be fed from it. It isn't.
If this was the first time I had ever done it I would understand but I have done this at least 4 or 5 times before. And the plumber who did the two bathrooms must have isolated it too.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!