- Posts
- 22,900
- Location
- In the next Glen
Seriously.
Looks like you had a lovely day out!!!
I had a great day, just getting a break from the norm which was nice. think I need to get out more, well after my roof is done.
Seriously.
Looks like you had a lovely day out!!!
All this mention of pool, have you given up un having a nooker table?Me 3rd water butt is filling up. Will monitor fer leaks. We has add constant gentle rain fer 3 hours. Me squirrel appeared. Dripping wet. Very nervous this time. Run oft then came back ferris nut. Never returned. Tis a shsme he dun't realise eye ain't gunner hurt him. If he came in he would be warm and dry. Plenty of nuts and fresh water. Apples anorl. Could gerrim a blankit to roll up in front of the telly. He can climb up the curtains and play pool wiv me.
Well the hens are in their lickle bed, so I is off to mine.
Kip well folks
No, I am allergic to feathers!Do you use them as pillows
Failed, currently trying to put on the new ball joint in 5mm away from getting it in. Any tips. I'll admit I'm not far off tears atm
Ok, here we go.Failed, currently trying to put on the new ball joint in 5mm away from getting it in. Any tips. I'll admit I'm not far off tears atm
So youve got these then........No, I am allergic to feathers!
and TBH they are a bit scrawny, although friendly enough!
Oh My God no!
Oh My God no!
Where the flip did you get a pic like that??!!
Although allergic to feathers it only means I cannot sleep wiv ma heed on a fevver pillow or under a fevver duvet, but I can pick our hens up and give them a stroke etc. I think it may depend on the fevvers, a bit like cats, I am only allergic to some cats.
So might just be duck down or summat.
But this thing looks like summat out of a Hammer Horror movie, "Return of the Henz" or summat.
Yuk!!
Was you at Glamis?I had a great day, just getting a break from the norm which was nice. think I need to get out more, well after my roof is done.
Gottid me nooker table built. A make shift one with door seal foam stick on stuff as the cushion. Not going mad wivvit building it betterer until eye knows the mdf will stay straight. Eye has built it to propper nooker table speck for shape un size of pocket. Tis 8x4 foot. Was using 2 1/16 inch nooker balls but when changing too/from these to pool balls at 2 1/4 inch which are heavier it messed up me shots. Am no good burrit makes fungs worser. So eye bort some merkin size pool balls 2 1/4 inch to practice wiv. Eye were in a pool comp at wuk and me shots were all over the place some days. Especially if eye'd been practicing wiv me nooker balls at home day before. Fink it were because of changing between different balls. Weight un size seems to make a difference. And eye hassa dominant eye problem so need to prsctice cueing straight..All this mention of pool, have you given up un having a nooker table?
Was you at Glamis?
One of me landy rovering mates was at Glamis and said it was goodNo was at Ingliston motor festival.
Shocked - a bird with no clothes on in this Fred
Gottid me nooker table built. A make shift one with door seal foam stick on stuff as the cushion. Not going mad wivvit building it betterer until eye knows the mdf will stay straight. Eye has built it to propper nooker table speck for shape un size of pocket. Tis 8x4 foot. Was using 2 1/16 inch nooker balls but when changing too/from these to pool balls at 2 1/4 inch which are heavier it messed up me shots. Am no good burrit makes fungs worser. So eye bort some merkin size pool balls 2 1/4 inch to practice wiv. Eye were in a pool comp at wuk and me shots were all over the place some days. Especially if eye'd been practicing wiv me nooker balls at home day before. Fink it were because of changing between different balls. Weight un size seems to make a difference. And eye hassa dominant eye problem so need to prsctice cueing straight..
It's the lower ball joint. I kinda gave up the old one came out fine with a whack but it was getting the new one in. It was just getting the holes to line up where I lost my energy. And the shaft from the gar box to the wheel was knocked so I don't think that was good. I was fully wiped yesterday and just went to bed early.It would help if we knew which ball joint and maybe had some pics.
If the old one came out the new one will go in.
Is this on a Freelander?
If so maybe post on their part of the forum.
Not trying to be unhelpful here, just don't know anything about them.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!