WhiskyLassie
Well-Known Member
- Posts
- 5,470
- Location
- Uk
Hello weekend you are very welcomed
I had the same issue and using a separate power supply fixed it...that the Rev counter on the Lathe is a big disappointment.
I've wired it up and it starts up with 4 Zero's (as expected) but when running the lathe it gives random results that are just too erratic for words. Using a separate hand-held laser rev-counter I get rock solid results right where I expect them to be for the chosen gearing. It is very puzzling. I will try a dedicated 12v power supply to the unit instead of the 15v power from the VFD.
Nope, brand new out of the box. If I pass a North-pole of a magnet past it the LED on the sensor blinks (as it should).Don’t know nuffin about lathe rev counters, but could the sensor be dirty?
Indeed, see my previous post. The sensor needs a clean supplyNope, brand new out of the box. If I pass a North-pole of a magnet past it the LED on the sensor blinks (as it should).
It ought to be fine. Maybe the VFD is interfering with it electrically.
I did say eye nose nuffin about themNope, brand new out of the box. If I pass a North-pole of a magnet past it the LED on the sensor blinks (as it should).
It ought to be fine. Maybe the VFD is interfering with it electrically.
Had a simler problem just check the filter behind it should be a impeller and should move freely if its jammed it will not go to the next cycle ours was jammed with a bullet the W missed in my pocketLoosing the will to live
Washing machine wont drain now, switched it off for a bit hoping that it might re set but it wont drain.
Could do with an update anyway so looking for a good washer dryer cheap ,,, anyone ?
I'm sure the thieves won't mind but nice motor what did you say your address was
I'm a Beretta manI‘ve always fancied a Thompsons with a drum magazine if anyone has one lying around
Bird ?Pulled on to the A2 eastbound this afternoon and something hit the drivers door, had a look around then realised the door mirror had no reflective glass in it
The backing is there, so not sure what happened
Dunno there was no cloud of feathers which normally signals a bird strikeBird ?
Thanks, I'll take it outdoors and drain itHad a simler problem just check the filter behind it should be a impeller and should move freely if its jammed it will not go to the next cycle ours was jammed with a bullet the W missed in my pocket
Welcome to world of "we don't care about you but as long as it sells...."... that I am shocked that since Grenfell towers ANY window placed in a domestic property that is <1M from the boundary MUST be 30 minute fire resistant.
This is a huge cost uplift. Even IF the neighbours property is >2M from the same boundary. This is NUTS IMHO.
Mig welder tip in the pumpHad a simler problem just check the filter behind it should be a impeller and should move freely if its jammed it will not go to the next cycle ours was jammed with a bullet the W missed in my pocket
Littlun might fink is a bit scaryFor all you guys and girls who have little children to look after. Here's a drawing for them to colour in.
Download and Print.View attachment 309474
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!