Hippo
Lord Hippo
- Posts
- 53,840
When the highways agency used them they did some high miles but fink they were sold at around 300k miles if they lasted that long.Disco3 apparently
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hicap phill
Well-Known Member
- Posts
- 16,239
- Location
- Wiltshire
- Posts
- 44,822
- Location
- East Dorset
Wheels don't reely fill the arches do they?
Stone56
Well-Known Member
- Posts
- 3,216
- Location
- Up a mountain
Did you paint the mud on itAnd another
P1040768a vux6fap
Stone56
Well-Known Member
- Posts
- 3,216
- Location
- Up a mountain
Not a lot of differents is there
- Posts
- 7,877
- Location
- East Midlands
I saw that for sale on Ebay not too long ago. The van body seems to be sitting a little high in relation to the wheels, presumably to accommodate all the running gear.
Once upon a time customizers used to take a classic car and put a later, more powerful engine in it. Hence the Rover V8 in the Ford Anglia kind of arrangement. Nowadays people seem to take the whole running gear, floorpan and dash/scuttle from the donor vehicle and graft the classic car bodyshell over the top. That way there's precious little left of the classic car apart from the outer body panels, doors and windows. I suppose with modern donor vehicles it's easier to do that, because you can keep all the suspension, wiring looms, ECUs and electronically controlled instruments together as a package. But it does mean that a great deal of the original classic car has been chopped away. Yes, it might look like a 1957 Chevrolet or whatever, but it's only the very outermost skin.
- Posts
- 9,096
- Location
- North Lincs
Electronic Speed Controller and yes they are used in RC cars but are also very useful if you are building a variable speed drive.
It depends on the motor type of course. I spend my days designing such things and the topic is huge!
Hicap phill
Well-Known Member
- Posts
- 16,239
- Location
- Wiltshire
It was a “mule” that’s how landrover secretly tested stuff but always spotted round longbridge/rover works
Always fun to see the old 6R4 metros been tested as lived not to far from there
doriz
Well-Known Member
- Posts
- 17,312
Spend all day breaking a static caravan by hand. Jeez the rubbish. Anyhoo, the tear down jobs 2/3 done. Then there is the wood to burn and the metal to weigh in.
- Posts
- 7,877
- Location
- East Midlands
Ah, so it's a factory original rather than a later adaptation.
Put me off buying it, because when you buy someone else's project you buy all their bodges too.
- Posts
- 7,877
- Location
- East Midlands
Xylia's just emailed me to say that the facial recognition software on her Apple devices is recognising her face again, so it shows the swelling must be going down. She seemed much better when I went to see her today and there is even some talk of her being sent home early in the next week, so that'll be good.
So there's a handy household hint. If you want to thwart facial recognition software and evade the database state, contract cellulitis in your upper body.
So there's a handy household hint. If you want to thwart facial recognition software and evade the database state, contract cellulitis in your upper body.
- Posts
- 7,877
- Location
- East Midlands
Also I noticed as I came home that some of the disposable nappies that have been disposed of in our street had been run over by passing cars and the faeces had been expelled. It's a good job I wasn't standing in the way when that happened. Those of you who can live in rural areas full time are so lucky.
Stone56
Well-Known Member
- Posts
- 3,216
- Location
- Up a mountain
What!! So rubbish is being chucked in the street's or is it urban foxes dragging it about
- Posts
- 22,902
- Location
- In the next Glen
Electronic stability control. I really should read on.....
- Posts
- 22,902
- Location
- In the next Glen
- Posts
- 22,902
- Location
- In the next Glen
- Posts
- 44,822
- Location
- East Dorset
The one based on the Marina Van??
- Posts
- 2,775
- Location
- Seeking shade in the KSA
Whats going on in yer street for this to happen.
BoB has been visiting someone in the neighbourhood
- Posts
- 44,822
- Location
- East Dorset
There are extremely good reasons for doing this, or rather HAVING to do this. One being that unless you cut the running gear and engine totally free from the ECU managed stuff, you have to do it, but secondly to do with SVA or as the latest version is called, IVA, or "heavily modified vehicles" so that the owner can eventually get it registered and back on the road.
Yes, it is a flipping shame, and the Rod, Custom and Kit Car world hate it.
18 Wheeler
Member
- Posts
- 61
- Location
- Dudley
That atchually looks like nodge in Newquay
Similar threads
