well being hunched over you are prime bait for a bit of bumming off me and @Broke Again
If that does not give you the incentive to hurry up and heal nothing will , we can be there in 5 hours
You have been warned - get well soon or else
works on most people apart from @Broke Again , @kurtjohnson10 or @Mackers , we will take the bumming remedyIve just been outside.........Im fine........
works on most people apart from @Broke Again , @kurtjohnson10 or @Mackers , we will take the bumming remedy
works on most people apart from @Broke Again , @kurtjohnson10 or @Mackers , we will take the bumming remedy
I have had a look online but nothing seems within my budget/reach for transport etc. etc. I only have a little ' 6" x 15' workshop and half of that is an 8 x 2 workbench.The S&B lathe cost me £700 and it included 2 chucks plus all the other tooling (in fact more than I could use) the Raglan was 'free' as it came from a family friend (free but around £140 in expenses).
The Centec cost £500 including a load of tooling etc.
All these old British bits of iron can still be had for reasonable money if you stay away from the big names like Myford and Harrison etc
Good ploy. Bobbins is ground feeders.
Ah I see you just pretend you've got a sore back & bend over
Post of the week award. And so early in the weekIve just been outside.........Im fine........
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
