- Posts
- 22,904
- Location
- In the next Glen
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hippo
Lord Hippo
- Posts
- 53,847
who?
- Posts
- 22,904
- Location
- In the next Glen
Him thats been down a long time..
- Posts
- 22,904
- Location
- In the next Glen
Busy wee day for me got loads of pointing done, my mate came out to help me as he needed to
get out for a while so that was a great wee shift. Then fixed the slate on my neebs roof & siliconed
inside her window ledge as there was a big space.
Went for Chinese sat at the sea & scoffed it then took the dog a nice walk along the shore.
get out for a while so that was a great wee shift. Then fixed the slate on my neebs roof & siliconed
inside her window ledge as there was a big space.
Went for Chinese sat at the sea & scoffed it then took the dog a nice walk along the shore.
- Posts
- 12,098
- Location
- Far out West
Busy wee day
& siliconed
inside her window ledge as there was a big space.
.
This sounds like a euphemism or something to me !!
- Posts
- 22,904
- Location
- In the next Glen
This sounds like a euphemism or something to me !!
No definitely not get yer mind out the gutter laddie.
- Posts
- 12,098
- Location
- Far out West
No definitely not get yer mind out the gutter laddie.
But, but I like keeping me mind in the gutter
- Posts
- 22,904
- Location
- In the next Glen
I forgot to say, I think the nob that works with me hasnt learned his lesson ffs I really cant believe this.....
We were putting some timber through my planner & noticed the blades could be doing with
a sharpen. Removed them and he said I'll take them home an give them a sharpen, 2 days later he
brings them back & its pizzin doon so I just chuck them into the motor. Today I emptied the landy
and looked at the blades & defo not the ones he had taken away. I know this as the last job we
were on with his planner (same as mine btw) hit something and took 2 little chunks out the blades
& was making 2 lines on the hand rails we were making. So I changed them round as they are double
sided. Now he has swapped the blades over & gave me the ones with the 2 little chunks out them.
The thing is I removed them in front on him & inspected the blades I even showed him a tiny
nick on one side. If he was in front of me today id have punched him the fk out
He really cant help himself. I think they as 10 to 20 quid a set.
Ok rant over. (sorry)
We were putting some timber through my planner & noticed the blades could be doing with
a sharpen. Removed them and he said I'll take them home an give them a sharpen, 2 days later he
brings them back & its pizzin doon so I just chuck them into the motor. Today I emptied the landy
and looked at the blades & defo not the ones he had taken away. I know this as the last job we
were on with his planner (same as mine btw) hit something and took 2 little chunks out the blades
& was making 2 lines on the hand rails we were making. So I changed them round as they are double
sided. Now he has swapped the blades over & gave me the ones with the 2 little chunks out them.
The thing is I removed them in front on him & inspected the blades I even showed him a tiny
nick on one side. If he was in front of me today id have punched him the fk out
He really cant help himself.
I think they as 10 to 20 quid a set. Ok rant over. (sorry)
- Posts
- 22,904
- Location
- In the next Glen
- Posts
- 22,904
- Location
- In the next Glen
- Posts
- 22,904
- Location
- In the next Glen
Id tell em to fuck off, buy one of them garden spray water things an wait for them to show up & turn it on.
Hicap phill
Well-Known Member
- Posts
- 16,242
- Location
- Wiltshire
Back from the party. All the kids sugared up & handed back to the parents.
- Posts
- 44,834
- Location
- East Dorset
Oh, I read "planner" as meaning some kind of book or phone thing where you planned stuff. Eventually got that you meant "planer".I forgot to say, I think the nob that works with me hasnt learned his lesson ffs I really cant believe this.....
We were putting some timber through my planner & noticed the blades could be doing with
a sharpen. Removed them and he said I'll take them home an give them a sharpen, 2 days later he
brings them back & its pizzin doon so I just chuck them into the motor. Today I emptied the landy
and looked at the blades & defo not the ones he had taken away. I know this as the last job we
were on with his planner (same as mine btw) hit something and took 2 little chunks out the blades
& was making 2 lines on the hand rails we were making. So I changed them round as they are double
sided. Now he has swapped the blades over & gave me the ones with the 2 little chunks out them.
The thing is I removed them in front on him & inspected the blades I even showed him a tiny
nick on one side. If he was in front of me today id have punched him the fk out
He really cant help himself.
Ok rant over. (sorry)
He really is a cheapskate or lazy ****.
Wot I don't unnerstand is that he is so thick he doesn't realise how thin the ice is that he is skating over with you.
Add it to his bill, and try to stop yourself from punching him out. Altho if I were in your shoes I too would be punching him out and I haven't done that to anyone I worked with for about 48 years.
Don't worry about ranting.
It is far, far better that you rant on here than do him some damage and get yourself in bother!!!
- Posts
- 44,834
- Location
- East Dorset
- Posts
- 44,834
- Location
- East Dorset
Well I am off to kip.
Really lazy day here today. Didn't get dressed until it was time to cook dinner at about 6 pm!!
Sleep really well tonight and take it easy tomoz!
Really lazy day here today. Didn't get dressed until it was time to cook dinner at about 6 pm!!
Sleep really well tonight and take it easy tomoz!
- Posts
- 6,593
- Location
- uk
Morning all. Have a good saturday (or sunday if you are that way inclined) and find lots of things to not do
Similar threads
